[clug] Config & software for BigPong Adsl

[Mick]

I've been using a 5x86 as an IpCop box to connect to bigpong adsl for the
last coupla years but it has come down with a serious case of lurgy so I
need to find another way to connect my lan.

my current setup is:
|-------------| |-------------| |-------------|
|  linux rh9  | |    win2k    | |    winme    |
|192.168.1.100| |192.168.1.101| |192.168.1.102|
|-------|-----| |-------|-----| |---|---------|
        |               |           |
        |------------|  |-----------|
                   |-|--|--|          |-------|
                   |  HUB  |          |bigpong|
                   |-|-|---|          |---|---|
        |------------| |                  |
        |       |------|------|           |
|-------|-----| |    ipcop    |           |
|   printer   | |192.168.1.1  | |---------|---|
|192.168.1.51 | | 0.0.0.0     ---  SpeedTouch |
|-------------| |-------------| |-------------|
The Win2K box's only function is to provide a supported configuation for
when the ADSL service goes feral.

What I was planning is:
|-------------| |-------------| |-------------|
|  linux rh9  | |    win2k    | |    winme    |
| 10.0.0.130  | | 10.0.0.131  | | 10.0.0.132  |
|-------|-----| |------|------| |---|---------|
        |              |            |
        |------------| | |----------|
                   |-|-|-|-|          |-------|
                   |  HUB  |          |bigpong|
                   |-|---|-|          |---|---|
        |------------|   |---------|      |
        |                          |      |
|-------|-----|                 |--|------|---|
|   printer   |                 | SpeedTouch  |
|  10.0.0.51  |                 | 10.0.0.138  |
|-------------|                 |-------------|

Now comes the big one, what software do I need on each box and how should it
be configured?

/]/]ik