PCMCIA Troubles

[Finn Blucher]

Okay,
Trying to get pcmcia working on my ASUS L2000B laptop. Upon inserting any one of a number of pcmcia card I get the following error in dmesg:

cs: cb_alloc(bus 2): vendor 0xffff, device 0xffff
PCI: device 02:00.0 has unknown header type 7f, ignoring.

and a lspci give a:

pcilib: Cannot open /proc/bus/pci/02/07.2
lspci: Unable to read 64 bytes of configuration space.

The laptop seems to keep working fine, lspci just seems to be unhappy, even after you remove the pcmcia card.

It's all getting a bit anoying. Forcing the correct module to load obviously doesn't help. I've tried using 2.4.20's internal pcmcia support, and 2.4.20 without pcmcia compiled and the latest pcmcia-cs package. Same error. Also tried 2.4.18, same error.

A working lspci:

lspci
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04)
00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio (rev 02)
00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW
02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C (rev 10)
02:07.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8)
02:07.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8)
02:07.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller


Not really sure where to go from hear. Had a few pokes around on Google. By the way, works fine under windows, damn it. 

Seeya,
Finn.