Help please!

[Tomasz Ciolek]

 there are modules for adpatec raid and megaraid (perc et al) in the 2.4
 source. adaptec 1200S is a aic7xxxx driver jobbie.

 This means you need scsi drivers in the initrd or complied into kernel
 
 regards
 TMC

 
On Mon, May 20, 2002 at 02:54:45PM +1000, Brett Worth wrote:
> On Mon, 20 May 2002, Stephen Hodgman wrote:
> 
> > There are two:
> > Adaptec 1200S (scsi1) with RAID disk(s) plus SymbiosXXXX for Tape controller 
> > (scsi0)
> 
> I'm not familiar with the Adaptec and cant make a recommendation.  See if the BIOS on the
> Adaptec talks about translation.  Is it a RAID controller or are you doing software RAID?
> 
> -- 
> Brett
> 
>   /) _ _ _/_/ / / /  _ _//
>  /_)/</= / / (_(_/()/< ///
> 
>  Cray Australia.
>  brettw at cray.com +61 2 6295 4023
> 
> PGP: 1024R/27EB604F  22A9 A85A 22BD 496B 2443  
>                      35E5 46F7 0712 27EB 604F

-- 
Tomasz M. Ciolek	*
			* 	Everything falls under the law of change;	
<tmc at dreamcraft.com.au>	*	  Like a dream, a phantom, a bubble, a shadow,
<tmc at goldweb.com.au>	*	  like dew of flash of lightning.
			*	  You should contemplate like this. 
*******************************************************************************
GPG Key ID: 0x7A18E49D	*	Available on www.pgp.net
*******************************************************************************