Sound card diagnosed - but still not working

[jeremy at itassist.net.au]

On  9 Aug, Michael Brewer wrote:
> Hello,
> 
> Thanks Peter for your advice.  I found out that the motherboard is an ASUS
> TX97-X with a Creative Labs ViBRA 16CL/CX 16-bit ISA with OPL-3 FM
> Synthesize sound card.
> 
> It is supposed to be Sound Blaster 16 compatible.
> 
> In sndconfig I chose sound blaster 16, then it askes for the card settings.
> As the card is built into the motherboard there are no jumper settings, so I
> have no way of knowing what they are (or do I?).  I left the settings as
> they were and I got the following error:
> 
> /lib/modules/2.4.2-2/kernel/drivers/sound/sb.o: init_module: No such device
> /lib/modules/2.4.2-2/kernel/drivers/sound/sb.o: insmod
> /lib/modules/2.4.2-2/kernel/drivers/sound/sb.o: failed
> /lib/modules/2.4.2-2/kernel/drivers/sound/sb.o: insmod
> sound-slot-0 failed
> 
> I have tried various card configurations - changing the IRQ and DMA settings
> etc with the same results.
> 
> ANY IDEAS ??
> 
> Thanks,
> -MICK-
> 
> 


Yup.  Read your mother board manual for the settings.  You may also
be able to set them in the bios config.


-- 
I/O, I/O,
It's off to disk I go,
A bit or byte to read or write,
I/O, I/O, I/O...