[Samba] Why I can not login my shared folder under samba + CentOS 7
Sketch
smblist at rednsx.org
Tue Dec 6 14:43:02 UTC 2016
On Sat, 3 Dec 2016, truename via samba wrote:
> I found that if I create a folder under / as my shared folder(for example: /data), the samba work. If the shared folder is /home/myname/data, it doesn't work.
Did you follow the directions in your smb.conf?
# Turn the samba_enable_home_dirs Boolean on if you want to share home
# directories via Samba. Run the following command as the root user to turn this
# Boolean on:
# setsebool -P samba_enable_home_dirs on
>
>
>
>
>
> At 2016-12-03 12:31:31, "truename via samba" <samba at lists.samba.org> wrote:
>> The result of accessing from windows is same as accessing from Linux, after I input correct username and password and click connect button, the login dialog re-popup.
>>
>>
>> Thanks
>> On 12/02/2016 22:22, Gaiseric Vandal via samba wrote:
>> Can you access from windows?
>>
>>
>>
>>
>> I also notice that samba 4.2.10 is no longer a supported version.
>>
>>
>> On 12/01/16 15:39, truename via samba wrote:
>>> Following is output of smbclient -L \\127.0.0.1 -U test1:
>>>
>>>
>>>
>>> Sharename Type Comment
>>> --------- ---- -------
>>> data Disk data
>>> IPC$ IPC IPC Service (Samba Server Version 4.2.10)
>>> test1 Disk Home Directories
>>> hp5550-1:7 Printer hp5550-1
>>> e-STUDIO283:2 Printer e-STUDIO283
>>> FX3D490A:3 Printer FX3D490A
>>> HPCP2025:9 Printer HPCP2025
>>> HPM2727:10 Printer HPM2727
>>> hp5550-2:8 Printer hp5550-2
>>> hp-color-LaserJet-5550-172-16-10-214:4 Printer hp-color-LaserJet-5550-172-16-10-214
>>> ML-1660-Series:1 Printer ML-1660-Series
>>> ML-1660-Series:11 Printer ML-1660-Series
>>> topdf:12 Printer topdf
>>> HP5100:6 Printer HP5100
>>> hp5000-1:5 Printer hp5000-1
>>>
>>> Server Comment
>>> --------- -------
>>> LOCALHOST Samba Server Version 4.2.10
>>>
>>> Workgroup Master
>>> --------- -------
>>> MYGROUP LOCALHOST
>>>
>>>
>>> And following is content of my smb.conf under /etc/samba:
>>>
>>>
>>> # This is the main Samba configuration file. For detailed information about the
>>> # options listed here, refer to the smb.conf(5) manual page. Samba has a huge
>>> # number of configurable options, most of which are not shown in this example.
>>> #
>>> # The Official Samba 3.2.x HOWTO and Reference Guide contains step-by-step
>>> # guides for installing, configuring, and using Samba:
>>> # http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
>>> #
>>> # The Samba-3 by Example guide has working examples for smb.conf. This guide is
>>> # generated daily: http://www.samba.org/samba/docs/Samba-Guide.pdf
>>> #
>>> # In this file, lines starting with a semicolon (;) or a hash (#) are
>>> # comments and are ignored. This file uses hashes to denote commentary and
>>> # semicolons for parts of the file you may wish to configure.
>>> #
>>> # Note: Run the "testparm" command after modifying this file to check for basic
>>> # syntax errors.
>>> #
>>> #---------------
>>> # Security-Enhanced Linux (SELinux) Notes:
>>> #
>>> # Turn the samba_domain_controller Boolean on to allow Samba to use the useradd
>>> # and groupadd family of binaries. Run the following command as the root user to
>>> # turn this Boolean on:
>>> # setsebool -P samba_domain_controller on
>>> #
>>> # Turn the samba_enable_home_dirs Boolean on if you want to share home
>>> # directories via Samba. Run the following command as the root user to turn this
>>> # Boolean on:
>>> # setsebool -P samba_enable_home_dirs on
>>> #
>>> # If you create a new directory, such as a new top-level directory, label it
>>> # with samba_share_t so that SELinux allows Samba to read and write to it. Do
>>> # not label system directories, such as /etc/ and /home/, with samba_share_t, as
>>> # such directories should already have an SELinux label.
>>> #
>>> # Run the "ls -ldZ /path/to/directory" command to view the current SELinux
>>> # label for a given directory.
>>> #
>>> # Set SELinux labels only on files and directories you have created. Use the
>>> # chcon command to temporarily change a label:
>>> # chcon -t samba_share_t /path/to/directory
>>> #
>>> # Changes made via chcon are lost when the file system is relabeled or commands
>>> # such as restorecon are run.
>>> #
>>> # Use the samba_export_all_ro or samba_export_all_rw Boolean to share system
>>> # directories. To share such directories and only allow read-only permissions:
>>> # setsebool -P samba_export_all_ro on
>>> # To share such directories and allow read and write permissions:
>>> # setsebool -P samba_export_all_rw on
>>> #
>>> # To run scripts (preexec/root prexec/print command/...), copy them to the
>>> # /var/lib/samba/scripts/ directory so that SELinux will allow smbd to run them.
>>> # Note that if you move the scripts to /var/lib/samba/scripts/, they retain
>>> # their existing SELinux labels, which may be labels that SELinux does not allow
>>> # smbd to run. Copying the scripts will result in the correct SELinux labels.
>>> # Run the "restorecon -R -v /var/lib/samba/scripts" command as the root user to
>>> # apply the correct SELinux labels to these files.
>>> #
>>> #--------------
>>> #
>>> #======================= Global Settings =====================================
>>>
>>> [global]
>>>
>>> # ----------------------- Network-Related Options -------------------------
>>> #
>>> # workgroup = the Windows NT domain name or workgroup name, for example, MYGROUP.
>>> #
>>> # server string = the equivalent of the Windows NT Description field.
>>> #
>>> # netbios name = used to specify a server name that is not tied to the hostname.
>>> #
>>> # interfaces = used to configure Samba to listen on multiple network interfaces.
>>> # If you have multiple interfaces, you can use the "interfaces =" option to
>>> # configure which of those interfaces Samba listens on. Never omit the localhost
>>> # interface (lo).
>>> #
>>> # hosts allow = the hosts allowed to connect. This option can also be used on a
>>> # per-share basis.
>>> #
>>> # hosts deny = the hosts not allowed to connect. This option can also be used on
>>> # a per-share basis.
>>> #
>>> # max protocol = used to define the supported protocol. The default is NT1. You
>>> # can set it to SMB2 if you want experimental SMB2 support.
>>> #
>>> workgroup = MYGROUP
>>> server string = Samba Server Version %v
>>>
>>> ; netbios name = MYSERVER
>>>
>>> ; interfaces = lo eth0 192.168.12.2/24 192.168.13.2/24
>>> ; hosts allow = 127. 192.168.12. 192.168.13.
>>>
>>> ; max protocol = SMB2
>>>
>>> # --------------------------- Logging Options -----------------------------
>>> #
>>> # log file = specify where log files are written to and how they are split.
>>> #
>>> # max log size = specify the maximum size log files are allowed to reach. Log
>>> # files are rotated when they reach the size specified with "max log size".
>>> #
>>>
>>> # log files split per-machine:
>>> log file = /var/log/samba/log.%m
>>> # maximum size of 50KB per log file, then rotate:
>>> max log size = 50
>>>
>>> # ----------------------- Standalone Server Options ------------------------
>>> #
>>> # security = the mode Samba runs in. This can be set to user, share
>>> # (deprecated), or server (deprecated).
>>> #
>>> # passdb backend = the backend used to store user information in. New
>>> # installations should use either tdbsam or ldapsam. No additional configuration
>>> # is required for tdbsam. The "smbpasswd" utility is available for backwards
>>> # compatibility.
>>> #
>>>
>>> security = user
>>> passdb backend = tdbsam
>>>
>>>
>>> # ----------------------- Domain Members Options ------------------------
>>> #
>>> # security = must be set to domain or ads.
>>> #
>>> # passdb backend = the backend used to store user information in. New
>>> # installations should use either tdbsam or ldapsam. No additional configuration
>>> # is required for tdbsam. The "smbpasswd" utility is available for backwards
>>> # compatibility.
>>> #
>>> # realm = only use the realm option when the "security = ads" option is set.
>>> # The realm option specifies the Active Directory realm the host is a part of.
>>> #
>>> # password server = only use this option when the "security = server"
>>> # option is set, or if you cannot use DNS to locate a Domain Controller. The
>>> # argument list can include My_PDC_Name, [My_BDC_Name], and [My_Next_BDC_Name]:
>>> #
>>> # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
>>> #
>>> # Use "password server = *" to automatically locate Domain Controllers.
>>>
>>> ; security = domain
>>> ; passdb backend = tdbsam
>>> ; realm = MY_REALM
>>>
>>> ; password server = <NT-Server-Name>
>>>
>>> # ----------------------- Domain Controller Options ------------------------
>>> #
>>> # security = must be set to user for domain controllers.
>>> #
>>> # passdb backend = the backend used to store user information in. New
>>> # installations should use either tdbsam or ldapsam. No additional configuration
>>> # is required for tdbsam. The "smbpasswd" utility is available for backwards
>>> # compatibility.
>>> #
>>> # domain master = specifies Samba to be the Domain Master Browser, allowing
>>> # Samba to collate browse lists between subnets. Do not use the "domain master"
>>> # option if you already have a Windows NT domain controller performing this task.
>>> #
>>> # domain logons = allows Samba to provide a network logon service for Windows
>>> # workstations.
>>> #
>>> # logon script = specifies a script to run at login time on the client. These
>>> # scripts must be provided in a share named NETLOGON.
>>> #
>>> # logon path = specifies (with a UNC path) where user profiles are stored.
>>> #
>>> #
>>> ; security = user
>>> ; passdb backend = tdbsam
>>>
>>> ; domain master = yes
>>> ; domain logons = yes
>>>
>>> # the following login script name is determined by the machine name
>>> # (%m):
>>> ; logon script = %m.bat
>>> # the following login script name is determined by the UNIX user used:
>>> ; logon script = %u.bat
>>> ; logon path = \\%L\Profiles\%u
>>> # use an empty path to disable profile support:
>>> ; logon path =
>>>
>>> # various scripts can be used on a domain controller or a stand-alone
>>> # machine to add or delete corresponding UNIX accounts:
>>>
>>> ; add user script = /usr/sbin/useradd "%u" -n -g users
>>> ; add group script = /usr/sbin/groupadd "%g"
>>> ; add machine script = /usr/sbin/useradd -n -c "Workstation (%u)" -M -d /nohome -s /bin/false "%u"
>>> ; delete user script = /usr/sbin/userdel "%u"
>>> ; delete user from group script = /usr/sbin/userdel "%u" "%g"
>>> ; delete group script = /usr/sbin/groupdel "%g"
>>>
>>>
>>> # ----------------------- Browser Control Options ----------------------------
>>> #
>>> # local master = when set to no, Samba does not become the master browser on
>>> # your network. When set to yes, normal election rules apply.
>>> #
>>> # os level = determines the precedence the server has in master browser
>>> # elections. The default value should be reasonable.
>>> #
>>> # preferred master = when set to yes, Samba forces a local browser election at
>>> # start up (and gives itself a slightly higher chance of winning the election).
>>> #
>>> ; local master = no
>>> ; os level = 33
>>> ; preferred master = yes
>>>
>>> #----------------------------- Name Resolution -------------------------------
>>> #
>>> # This section details the support for the Windows Internet Name Service (WINS).
>>> #
>>> # Note: Samba can be either a WINS server or a WINS client, but not both.
>>> #
>>> # wins support = when set to yes, the NMBD component of Samba enables its WINS
>>> # server.
>>> #
>>> # wins server = tells the NMBD component of Samba to be a WINS client.
>>> #
>>> # wins proxy = when set to yes, Samba answers name resolution queries on behalf
>>> # of a non WINS capable client. For this to work, there must be at least one
>>> # WINS server on the network. The default is no.
>>> #
>>> # dns proxy = when set to yes, Samba attempts to resolve NetBIOS names via DNS
>>> # nslookups.
>>>
>>> ; wins support = yes
>>> ; wins server = w.x.y.z
>>> ; wins proxy = yes
>>>
>>> ; dns proxy = yes
>>>
>>> # --------------------------- Printing Options -----------------------------
>>> #
>>> # The options in this section allow you to configure a non-default printing
>>> # system.
>>> #
>>> # load printers = when set you yes, the list of printers is automatically
>>> # loaded, rather than setting them up individually.
>>> #
>>> # cups options = allows you to pass options to the CUPS library. Setting this
>>> # option to raw, for example, allows you to use drivers on your Windows clients.
>>> #
>>> # printcap name = used to specify an alternative printcap file.
>>> #
>>>
>>> load printers = yes
>>> cups options = raw
>>>
>>> ; printcap name = /etc/printcap
>>> # obtain a list of printers automatically on UNIX System V systems:
>>> ; printcap name = lpstat
>>> ; printing = cups
>>>
>>> # --------------------------- File System Options ---------------------------
>>> #
>>> # The options in this section can be un-commented if the file system supports
>>> # extended attributes, and those attributes are enabled (usually via the
>>> # "user_xattr" mount option). These options allow the administrator to specify
>>> # that DOS attributes are stored in extended attributes and also make sure that
>>> # Samba does not change the permission bits.
>>> #
>>> # Note: These options can be used on a per-share basis. Setting them globally
>>> # (in the [global] section) makes them the default for all shares.
>>>
>>> ; map archive = no
>>> ; map hidden = no
>>> ; map read only = no
>>> ; map system = no
>>> ; store dos attributes = yes
>>>
>>>
>>> #============================ Share Definitions ==============================
>>>
>>> [homes]
>>> comment = Home Directories
>>> browseable = no
>>> writable = yes
>>> ; valid users = %S
>>> ; valid users = MYDOMAIN\%S
>>>
>>> [printers]
>>> comment = All Printers
>>> path = /var/spool/samba
>>> browseable = no
>>> guest ok = no
>>> writable = no
>>> printable = yes
>>>
>>> # Un-comment the following and create the netlogon directory for Domain Logons:
>>> ; [netlogon]
>>> ; comment = Network Logon Service
>>> ; path = /var/lib/samba/netlogon
>>> ; guest ok = yes
>>> ; writable = no
>>> ; share modes = no
>>>
>>> # Un-comment the following to provide a specific roving profile share.
>>> # The default is to use the user's home directory:
>>> ; [Profiles]
>>> ; path = /var/lib/samba/profiles
>>> ; browseable = no
>>> ; guest ok = yes
>>>
>>> # A publicly accessible directory that is read only, except for users in the
>>> # "staff" group (which have write permissions):
>>> ; [public]
>>> ; comment = Public Stuff
>>> ; path = /home/samba
>>> ; public = yes
>>> ; writable = yes
>>> ; printable = no
>>> ; write list = +staff
>>>
>>> [data]
>>> comment = data
>>> path = /home/myname/data
>>> valid users = test1
>>> write list = test1
>>> create mask = 0754
>>> sync always = Yes
>>> ; hide dot files = yes
>>> ; writeable = no
>>> ; browseable = yes
>>>
>>>
>>> Thanks
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> 在 2016-12-02 00:02:41,"Gaiseric Vandal via samba" <samba at lists.samba.org> 写道:
>>>> Did you configure this as a domain controller or a domain member ? Or
>>>> this just a standalone machine.
>>>>
>>>> From the command line can you try the following
>>>>
>>>> smbclient -L \\127.0.0.1 -U test1
>>>>
>>>> or maybe
>>>>
>>>> smbclient -d3 -L \\127.0.0.1 -U test1
>>>>
>>>>
>>>> You may also want to try 'MACHINENAME\test1' as the user name.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On 12/01/16 10:17, truename via samba wrote:
>>>>> Hi,
>>>>>
>>>>> I install samba by:
>>>>>
>>>>> sudo yum install samba.x86_64
>>>>>
>>>>> I edit /etc/samba/smb.conf by adding follows:
>>>>>
>>>>> [data]
>>>>> comment = data
>>>>> path = /home/myname/data
>>>>> valid users = test1
>>>>> write list = test1
>>>>> create mask = 0754
>>>>> sync always = Yes
>>>>> ; hide dot files = yes
>>>>> ; writeable = no
>>>>> ; browseable = yes
>>>>>
>>>>> Then take effect my config:
>>>>>
>>>>> service smb restart
>>>>>
>>>>> I create shared folder:
>>>>>
>>>>> cd ~
>>>>> mkdir data
>>>>>
>>>>> I create user:
>>>>>
>>>>> useradd test1
>>>>> smbpasswd -a test1
>>>>> <then password>
>>>>>
>>>>>
>>>>> Then I open my file manager and input:
>>>>>
>>>>> smb://127.0.0.1
>>>>>
>>>>> A login form popup, I enter username: test1 and the password, the login form returns again, I found I can not enter the shared folder by that account.
>>>>>
>>>>> Thanks
>>>>
>>>>
>>>> --
>>>> To unsubscribe from this list go to the following URL and read the
>>>> instructions: https://lists.samba.org/mailman/options/samba
>>
>>
>>
>> --
>> To unsubscribe from this list go to the following URL and read the
>> instructions: https://lists.samba.org/mailman/options/samba
>> --
>> To unsubscribe from this list go to the following URL and read the
>> instructions: https://lists.samba.org/mailman/options/samba
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: https://lists.samba.org/mailman/options/samba
More information about the samba
mailing list