[Samba] net ads info: failed to get server's current time

Rowland Penny rowlandpenny241155 at gmail.com
Thu Oct 22 21:53:30 UTC 2015


On 22/10/15 22:33, Guy-Laurent Subri wrote:
> On Thu, Oct 22, 2015 at 10:13:01PM +0100, Rowland Penny wrote:
>> On 22/10/15 21:51, Guy-Laurent Subri wrote:
>>> On Wed, Oct 21, 2015 at 07:06:33PM +0100, Rowland Penny wrote:
>>>> On 21/10/15 18:35, Guy-Laurent Subri wrote:
>>>>> Hi all,
>>>>> We're having issues with Samba at work. I've searched a bit and the
>>>>> only
>>>>> thing that have caught my eye is this: when I run the 'net ads info'
>>>>> command on our DC --we have a Debian on which samba4 is installed and
>>>>> configured as a AD DC-- I have the message "Failed to get server's
>>>>> current time!", and "Server time: Thu, 01 Jan 1970 01:00:00 CET".
>>>>
>>>> It works for me on a Debian 4.1.17 DC, so you may have something
>>>> mis-configured, have you altered the smb.conf in any way ?
>>>
>>> I don't think the modifications I did to smb.conf are relevant 
>>> enough to
>>> cause problem, but here's our smb.conf, just in case:
>>>
>>> # Global parameters
>>> [global]
>>>    workgroup = TRS-CH
>>>    realm = TRS-CH.COM
>>>    netbios name = PDC
>>>    server role = active directory domain controller
>>>    server services = +s3fs, +rpc, +nbt, +wrepl, +ldap, +cldap, +kdc,
>>> +drepl,
>>>                        +winbind, +ntp_signd, +kcc, +dnsupdate
>>> [netlogon]
>>>   path = /var/lib/samba/sysvol/trs-ch.com/scripts
>>>   read only = No
>>>
>>> [sysvol]
>>>   path = /var/lib/samba/sysvol
>>>   read only = No
>>>
>>>> do you have ntp installed and configured correctly ?
>>> Yes, I have it installed and everything works fine.
>>>
>>> I also already tested the DNS by running the commands described here:
>>> https://wiki.samba.org/index.php/Setup_a_Samba_Active_Directory_Domain_Controller 
>>>
>>>
>>> Everything is reachable.
>>>
>>> I tested kerberos by doing:
>>> 'kinit administrator at TRS-CH.COM'
>>> It showed up when I did 'klist'.
>>>
>>> Do you need more information ?
>>>
>>> Thanks !
>>> Cheers,
>>> Guy-Laurent Subri
>>
>> Are you running with Bind9 ?
>>
>> I think you need to remove all the '+' signs you have added to the
>> 'server services' line, you normally only use the '+' sign to add a
>> service to the line, I think you may still be using the un-shown 'dns'
>> option.
>> I would also recommend that you use the new separate 'winbindd' instead
>> of the 'winbind' that you are using. I think that before long the old
>> 'winbind' built into the samba daemon is going to disappear, so you
>> might as well get used to it now.
> Yes, I'm running Bind9.
> If I either remove the + sings or change 'windbind' to 'windbindd' I
> cannot contact the server again. (The result of the command 'net ads
> info' is : no logon servers, didn't find the ldap server).
>
> Cheers,
> Guy-Laurent Subri

OK, I have just joined a new DC to my domain and I am using Bind9 and 
this is what I have in smb.conf:

server services = s3fs, rpc, nbt, wrepl, ldap, cldap, kdc, drepl, 
winbindd, ntp_signd, kcc, dnsupdate

Note the lack of '+' signs

This is with Samba 4.3.1

I have also checked and 'net ads info' works as well, so if yours isn't 
working, then something else is wrong, can you post your ntp.conf and 
bind9 conf files, also your /etc/resolv.conf & /etc/krb5.conf

Rowland





More information about the samba mailing list