[Samba] Fwd: Samba-3.0.34 can ADS join but not non-ADS join.

[Linux Addict]

On Tue, Jul 28, 2009 at 1:07 PM, Jeremiah Martell
<inlovewithgod at gmail.com>wrote:

> I haven't had any responses to this yet.
>
> Is there any other information that would help diagnose the problem?
>
> To recap:
> Using the same network, the same computer, and the same smb.conf (with
> the exception of an added interefaces line for Samba-3.0.34) I am able
> to non-ADS join with Samba-3.0.14a but not Samba-3.0.34.
> Samba-3.0.34 first complained about an interfaces line in my smb.conf.
> But after adding the interfaces line joining still fails with "cannot
> join as standalone machine".
>
> Any suggestions? Any other information I need to provide?
>
> Thanks,
>  - Jeremiah
>
>
> ---------- Forwarded message ----------
> From: Jeremiah Martell <inlovewithgod at gmail.com>
> Date: Mon, Jul 27, 2009 at 9:04 AM
> Subject: Samba-3.0.34 can ADS join but not non-ADS join.
> To: samba at lists.samba.org
>
>
> I was using Samba-3.0.14a perfectly fine.
> Now, I'm trying to use Samba-3.0.34.
>
> I can do an "ADS" join fine with Samba-3.0.34, but I cannot do my old
> non-ADS join anymore. Winbindd starts and stays running fine, but when
> I run net to do the non-ADS join I'm running into a strange "interfaces"
> issue.
>
> It now wants an "interfaces" line in the smb.conf file when I attempt
> to join a domain (using all the same old smb.conf settings I was with
> Samba-3.0.14a).
>
> So I give an "interfaces = eth0" in my smb.conf file, but it does not
> join. It fails with a "cannot join as standalone machine".
>
> Running net with debug level 3 during this gives two interesting things:
>
> It cannot load ANSI_X3.4-1968.so
>
> And this...
>
> [2009/07/24 14:27:57, 3] source/lib/util.c:interpret_addr(1310)
>  sys_gethostbyname: Unknown host. eth0
> [2009/07/24 14:27:57, 2] source/lib/interface.c:interpret_interface(130)
>  can't determine netmask for eth0
> [2009/07/24 14:27:57, 0] source/lib/interface.c:load_interfaces(229)
>  WARNING: no network interfaces found
> [2009/07/24 14:27:57, 3] source/libsmb/namequery.c:get_dc_list(1557)
>  get_dc_list: preferred server list: ", abc.example.com"
> [2009/07/24 14:27:57, 1] source/libads/cldap.c:recv_cldap_netlogon(247)
>  Failed to parse cldap reply
> [2009/07/24 14:27:57, 3] source/libads/ldap.c:ads_try_connect(194)
>  ads_try_connect: CLDAP request 123.456.789.0 failed.
> cannot join as standalone machine
> [2009/07/24 14:27:57, 2] source/utils/net.c:main(1088)
>  return code = -1
>
> Using Wireshark shows multiple DNS lookups for "eth0.example.com", and a
> single
> CLDAP search,
> (&(&(DnsDomain=06:00:00:00)(Host=ABCABC))(NtVer=06:00:00:00)),
> that was successful but with no results.
>
> I ruled out any network issues because I can still non-ADS join on
> the same machine on the same network with my old Samba-3.0.14a code.
>
> I looked at the latest Samba-3.4.0 and noticed that the interface.c
> and interfaces.c are pretty different from Samba-3.0.34. Is this a known
> bug
> that was fixed in revisions post-Samba-3.0.34? Am I not understanding the
> "interfaces" line in my smb.conf file correctly?
>
> I'm not sure what the "CLDAP request failed" and "cannot join as
> standalone machine" would suggest.
>
> Any other questions/suggestions?
>
> Thanks,
>
> --
> - Jeremiah Martell
> http://inlovewithGod.com
>
>
>
Can you post your ifconfig eth0 output?