[Samba] Transfer rates faster than 23MBps?
Guenter Kukkukk
linux at kukkukk.com
Sat Sep 23 15:33:58 GMT 2006
On Saturday 23 September 2006 17:13, Doug VanLeuven wrote:
> Mark Smith wrote:
> > I also tried your values, with the tcp_window_scaling, with no luck.
>
> It's enable by default, but I explicitly set options other options
> depend on.
>
> I set up my test rig again.
> Host server
> 2.6.12-1.1376_FC3, samba 3.0.23
> Broadcom Nextreme BCM5702X Gigabit, tg3 driver default config
> Client
> 2.6.12-1.1381_FC3, samba 3.0.21pre3-SVN-build-11739
> Intel Pro/1000, 82546GB Gigabit, e1000 driver default config
> HD Drives on both are 45-50MBps
...snip
Hi Doug,
have you ever tried netio to check for raw needwork speed?
http://www.ars.de/ars/ars.nsf/docs/netio
It does not add any overhead caused by file operations - so it
can help to tune raw parameters.
The source is included - so it can be tuned, too.
When sniffing such traffic, also have a look, how tcpi/ip ACK
packets are used and whether they are send immediately
or with some delay.
Good luck - Guenter Kukkukk
More information about the samba
mailing list