Samba 2.2.4 Binary Package
Franco Tassone
franco.tassone at inwind.it
Mon Nov 18 22:08:36 GMT 2002
Hi all
I've checked the system logicals, and I can assure that SAMBA_ROOT is
defined ok, tried also Wolter advice in using VMS filenaming in smb.conf.
No changes, same error during startup, I can't browse the network although I
"see" the workgroup defined.
If for chance I try to access the VMS samba server for my pc, VMS itself
dumps and the system restarts !
BTW, I've not been able to run any samba on this machine (2.0.3 and 2.0.6
ko), though I have samba running on a separate volume in which I've
installed netbsd.
Any more hints ?
> > Hi,
> > I've downloaded the installation kit for Samba/VMS 2.2.4 and installed
it on
> > a mVax3100, running ovms7.2 with compaq tcpip from the same
distribution.
> > Obviously I used the precompiled modules for the vax atchitecture, so I
had
> > no problems in building and installing the the kit.
> > I've added the SAMBA_STARTUP.COM in my startup command file,
unfortunatelly
> > I receive the following error at startup:
> >
> > %TCPIP-E-STARTERROR, error starting SMBD service
> > -RMS-F-DEV, error in device name or inappropriate device type for
operation
> > %TCPIP-E-STARTERROR, error starting SMBD service
> > -RMS-F-DEV, error in device name or inappropriate device type for
operation
> >
> > The following is my smb.conf
> >
> > [global]
> > workgroup = WORKGROUP
> > dead time = 10
> > map archive = no
> > printing = bsd
> > printcap name = /sys$manager/tcpip$printcap.dat
> > load printers = yes
> > status = yes
> > security = user
> > default service = default
> > create mode = 0777
> >
> > interfaces = SE0
> > guest account = SAMBA_GUEST
> > log file = /samba_log/log.%m
> > socket options = TCP_NODELAY
> >
> > share modes = no
> >
> > [homes]
> > comment = Home Directories
> > browseable = no
> > read only = no
> > create mode = 0750
> >
> > I receive the error at startup either I specify "interfaces = SE0" or
not,
> > btw SE0 is the ethernet interface as seen by tcpip.
> > Could you help me please ?
> > Cheers
> >
> > ----- Original Message -----
> > From: <jean-yves.collot at cofiroute.fr>
> > To: "Samba VMS" <samba-vms at lists.samba.org>
> > Sent: Tuesday, November 12, 2002 9:44 AM
> > Subject: RE: Samba 2.2.4 Binary Package
> >
> > > An installation kit for Samba/VMS 2.2.4 is available at
> > > http://www.pi-net.dyndns.org/anonymous/jyc/
>
More information about the samba-vms
mailing list