2.0.6 Problem
Naveed Ahmed
Greatman at Softhome.net
Tue Apr 30 08:58:38 GMT 2002
I have done so and set path = /disk0/Naveed, but still can't browse shares
it gives following message
smbc \\acsys2\naveed
added interface ip=135.1.1.2 bcast=135.1.255.255 nmask=255.255.0.0
Password:
Domain=[POIROT] OS=[Unix] Server=[Samba 2.0.6]
smb: \> dir
ERRDOS - ERRbadfile (File not found.) listing \*
40960 blocks of size 512. 1 blocks available
Smbclient gives OS=[Unix] is problem due to this?
Naveed
----- Original Message -----
From: "John E. Malmberg" <wb8tyw at qsl.net>
To: <samba-vms at lists.samba.org>
Sent: Tuesday, April 30, 2002 9:27 AM
Subject: Re: 2.0.6 Problem
> There has been a few reports that physical device names are not working
> properly in the smb.conf file for SAMBA 2.0.6.
>
> This indicates a bug in Frontport that would need to be fixed.
>
> The workaround is to use concealed logical names like:
>
> $define/system/exec/trans=concealed user_disk dka0:
>
> The use of physical device names is discouraged in OpenVMS. Logical
> names allow easier system management, especially through upgrades of
> disk hardware.
>
> -John
> wb8tyw at qsl.network
> Personal Opinion Only
>
>
> "Naveed Ahmed" <Greatman at Softhome.network> wrote:
> >
> > Samba 2.0.6 is configured properly on Alpha but I can't browse
> > custom shares like
> >
> > [Naveed] path = /dka0/Naveed
> > public = yes
> > guest ok = yes
> > only guest = yes
> > writable = yes
> > printable = no
> >
> > Testparm give no error for Naveed but Samba gives message when I run
> > smbclient \\acsys2\Naveed tree connect failed:
> > ERRSRV - ERRinvnetname (Invalid network name in tree connect.)
> > also entry in
> > log file is [2002/04/29 16:50:06, 0]
> > CMS_ROOT:[SAMBA.SOURCE.SMBD]SERVICE.C;2:(486) Can't change directory
> > to /dka0/Naveed (no such file or directory)
> >
> > Although directory Naveed exists in DKA0, and same setting works in
> > VAX for SAMBA 2.0.3
>
>
More information about the samba-vms
mailing list