46a466fb51c8dcb5ce0352827bfa94aa1d6c5988 s3:libsmb: use local variables in cli_state_create() 3e34bf9046744772a00c08fbfd20a12e5e5e5124 s3:libsmb: use CAP_EXTENDED_SECURITY instead of cli->use_spnego 29480c8132866f4321e2e7a58f3658983cbd880f s3:torture/run_oplock4: don't set cli->use_level_II_oplocks a2a2d2e937d3d0c9e6a620a36e8ce5c14f35a310 s3:libsmb: make use of SMB_CAP_BOTH/CLIENT_MASK in cli_session_setup_capabilities() 1f6b2985b5c28b9ab83ccfb40ad4115718d1dd20 s3:libsmb: calculate the negotiated SMB1 capabilities in cli_negprot_done() 12989fa2bd4d43cdf2e0722e40936a7481077be0 s3:include: add some masks for SMB1 CAP_* flags 376c900cb40b23d36fc0ff5ae107d6a54584f4ea s3:libsmb: calculate all SMB1 capabilities we want to support for the connection 708e65e7c6ce59a8d5657065722b706115d71aef s3:libsmb: no need to reset capabilities in cli_session_setup_lanman2() 71aac668bd6a40f73d2aea32ac495c33897550e2 s3:libsmb: make sure we always set cli->capabilities at the end of cli_negprot_done() 877749dbed6c40af58e735170dc4e8127e3f2af6 s3:libsmb: remove unused cli->is_samba 03ce4ffd9320c40dc83b22c853f3f6d9aa15861b s3:libsmb: align chunk_size for cli_pull/push() to a page size of 1024 bytes 36db2b5b879f5a2e219607ccebb3b02f2e2f95a6 s3:libsmb: let cli_read/write_max_bufsize() return the max number of possible bytes 8170ac41172a173903368636ee778b21fa243140 s3:smbd: SMB ReadX with size > 0xffff should only possible for samba clients. bd11daed0aacc906c79b307dd7754341e4ebaeb2 s3:smbd: remember the client unix capabilities on the connection