Linux version 2.6.32-ARCH (alexey@kvm) (gcc version 4.4.2 20091208 (prerelease) (GCC) ) #1 SMP Sun Jan 24 22:05:36 MSK 2010
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cfde0000 (usable)
 BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS)
 BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data)
 BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000228000000 (usable)
DMI 2.4 present.
last_pfn = 0x228000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFF0000000 write-back
  3 base 0000CFE00000 mask FFFFFFE00000 uncachable
  4 base 000100000000 mask FFFF00000000 write-back
  5 base 000200000000 mask FFFFE0000000 write-back
  6 base 000220000000 mask FFFFF8000000 write-back
  7 disabled
TOM2: 0000000228000000 aka 8832M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000379fe000
NX (Execute Disable) protection: active
 0000000000 - 0000200000 page 4k
 0000200000 - 0037800000 page 2M
 0037800000 - 00379fe000 page 4k
kernel direct mapping tables up to 379fe000 @ 7000-d000
RAMDISK: 7ff15000 - 7ffef812
Allocated new RAMDISK: 00100000 - 001da812
Move RAMDISK from 000000007ff15000 - 000000007ffef811 to 00100000 - 001da811
ACPI: RSDP 000f7140 00014 (v00 GBT   )
ACPI: RSDT cfde3000 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP cfde3040 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT cfde30c0 067F4 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS cfde0000 00040
ACPI: SSDT cfde9980 0095E (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
ACPI: HPET cfdea300 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG cfdea340 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: TAMG cfdea380 0029A (v01 GBT    GBT   B0 5455312E BG?? 53450101)
ACPI: APIC cfde98c0 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: Local APIC address 0xfee00000
7942MB HIGHMEM available.
889MB LOWMEM available.
  mapped low ram: 0 - 379fe000
  low ram: 0 - 379fe000
  node 0 low ram: 00000000 - 379fe000
  node 0 bootmap 00009000 - 0000ff40
(9 early reservations) ==> bootmem [0000000000 - 00379fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0001000000 - 000139ee84]    TEXT DATA BSS ==> [0001000000 - 000139ee84]
  #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
  #5 [000139f000 - 00013ab0fe]              BRK ==> [000139f000 - 00013ab0fe]
  #6 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
  #7 [0000100000 - 00001da812]      NEW RAMDISK ==> [0000100000 - 00001da812]
  #8 [0000009000 - 0000010000]          BOOTMAP ==> [0000009000 - 0000010000]
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x000379fe
  HighMem  0x000379fe -> 0x00228000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x000cfde0
    0: 0x00100000 -> 0x00228000
On node 0 totalpages: 2063743
free_area_init_node: node 0, pgdat c130bc80, node_mem_map c13ad000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3967 pages, LIFO batch:0
  Normal zone: 1748 pages used for memmap
  Normal zone: 221994 pages, LIFO batch:31
  HighMem zone: 15885 pages used for memmap
  HighMem zone: 1820117 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @c5a00000 s28184 r0 d20968 u524288
pcpu-alloc: s28184 r0 d20968 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2046078
Kernel command line: ro root=/dev/sda1 resume=/dev/sda6 vga=0x305
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000379fe:00228000)
Memory: 8177308k/9043968k available (2200k kernel code, 76380k reserved, 935k data, 308k init, 7344008k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff1f000 - 0xfffff000   ( 896 kB)
    pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
    vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
      .init : 0xc1310000 - 0xc135d000   ( 308 kB)
      .data : 0xc1226011 - 0xc130ff40   ( 935 kB)
      .text : 0xc1000000 - 0xc1226011   (2200 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3114.292 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6228.58 BogoMIPS (lpj=31142920)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090903
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X2 550 Processor stepping 02
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6228.40 BogoMIPS (lpj=31142046)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: AMD Phenom(tm) II X2 550 Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (12456.99 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07]
pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03]
pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07]
pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03]
pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f]
pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff]
pci 0000:00:12.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff]
pci 0000:00:12.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
pci 0000:00:12.2: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02a000-0xfe02afff]
pci 0000:00:13.2: reg 10 32bit mmio: [0xfe029000-0xfe0290ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
pci 0000:00:14.1: reg 20 io port: [0xfa00-0xfa0f]
pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.5: reg 10 32bit mmio: [0xfe028000-0xfe028fff]
pci 0000:01:05.0: reg 10 32bit mmio pref: [0xd8000000-0xdfffffff]
pci 0000:01:05.0: reg 14 io port: [0xee00-0xeeff]
pci 0000:01:05.0: reg 18 32bit mmio: [0xfdfe0000-0xfdfeffff]
pci 0000:01:05.0: reg 24 32bit mmio: [0xfde00000-0xfdefffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.1: reg 10 32bit mmio: [0xfdffc000-0xfdffffff]
pci 0000:01:05.1: supports D1 D2
pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
pci 0000:00:01.0: bridge 32bit mmio: [0xfde00000-0xfdffffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd8000000-0xdfffffff]
pci 0000:02:00.0: reg 10 io port: [0xde00-0xdeff]
pci 0000:02:00.0: reg 18 64bit mmio pref: [0xfdaff000-0xfdafffff]
pci 0000:02:00.0: reg 20 64bit mmio pref: [0xfdae0000-0xfdaeffff]
pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:0a.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:0a.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff]
pci 0000:03:06.0: reg 10 32bit mmio: [0xfdcf8000-0xfdcfbfff]
pci 0000:03:06.0: reg 14 io port: [0xce00-0xceff]
pci 0000:03:06.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:03:06.0: supports D1 D2
pci 0000:03:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:06.0: PME# disabled
pci 0000:03:0e.0: reg 10 32bit mmio: [0xfdcff000-0xfdcff7ff]
pci 0000:03:0e.0: reg 14 32bit mmio: [0xfdcf4000-0xfdcf7fff]
pci 0000:03:0e.0: supports D1 D2
pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot
pci 0000:03:0e.0: PME# disabled
pci 0000:00:14.4: transparent bridge
pci 0000:00:14.4: bridge io port: [0xc000-0xcfff]
pci 0000:00:14.4: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdb00000-0xfdbfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
pci 0000:00:00.0: BAR 3: can't allocate resource
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:0a: mem resource (0xd1a00-0xd3fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0a: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0a: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0a: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0a: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0a: mem resource (0x100000-0xcfddffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x220-0x225 has been reserved
system 00:01: ioport range 0x290-0x294 has been reserved
system 00:02: ioport range 0x4100-0x411f has been reserved
system 00:02: ioport range 0x228-0x22f has been reserved
system 00:02: ioport range 0x238-0x23f has been reserved
system 00:02: ioport range 0x40b-0x40b has been reserved
system 00:02: ioport range 0x4d6-0x4d6 has been reserved
system 00:02: ioport range 0xc00-0xc01 has been reserved
system 00:02: ioport range 0xc14-0xc14 has been reserved
system 00:02: ioport range 0xc50-0xc52 has been reserved
system 00:02: ioport range 0xc6c-0xc6d has been reserved
system 00:02: ioport range 0xc6f-0xc6f has been reserved
system 00:02: ioport range 0xcd0-0xcd1 has been reserved
system 00:02: ioport range 0xcd2-0xcd3 has been reserved
system 00:02: ioport range 0xcd4-0xcdf has been reserved
system 00:02: ioport range 0x4000-0x40fe has been reserved
system 00:02: ioport range 0x4210-0x4217 has been reserved
system 00:02: ioport range 0xb00-0xb0f has been reserved
system 00:02: ioport range 0xb10-0xb1f has been reserved
system 00:02: ioport range 0xb20-0xb3f has been reserved
system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0a: iomem range 0xcfde0000-0xcfdfffff could not be reserved
system 00:0a: iomem range 0xffff0000-0xffffffff has been reserved
system 00:0a: iomem range 0xcfef0000-0xd7eeffff could not be reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0a: iomem range 0xfff80000-0xfffeffff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0xe000-0xefff
pci 0000:00:01.0:   MEM window: 0xfde00000-0xfdffffff
pci 0000:00:01.0:   PREFETCH window: 0x000000d8000000-0x000000dfffffff
pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
pci 0000:00:0a.0:   IO window: 0xd000-0xdfff
pci 0000:00:0a.0:   MEM window: 0xfdd00000-0xfddfffff
pci 0000:00:0a.0:   PREFETCH window: 0x000000fda00000-0x000000fdafffff
pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
pci 0000:00:14.4:   IO window: 0xc000-0xcfff
pci 0000:00:14.4:   MEM window: 0xfdc00000-0xfdcfffff
pci 0000:00:14.4:   PREFETCH window: 0xfdb00000-0xfdbfffff
pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:0a.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io:  [0xe000-0xefff]
pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdffffff]
pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff]
pci_bus 0000:02: resource 0 io:  [0xd000-0xdfff]
pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff]
pci_bus 0000:02: resource 2 pref mem [0xfda00000-0xfdafffff]
pci_bus 0000:03: resource 0 io:  [0xc000-0xcfff]
pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff]
pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff]
pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:01:05.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 874k freed
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1631
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xd8000000, mapped to 0xf8280000, using 1536k, total 16384k
vesafb: mode is 1024x768x8, linelength=1024, pages=18
vesafb: protected mode interface info at c000:a1aa
vesafb: pmi: set display start = c00ca24c, set palette = c00ca30a
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12b
PNP: No PS/2 controller found. Probing ports directly.
Failed to disable AUX port, but continuing anyway... Is this a SiS?
If AUX port is really absent please use the 'i8042.noaux' option.
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 308k freed
Write protecting the kernel text: 2204k
Write protecting the kernel read-only data: 696k
libata version 3.00 loaded.
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1: softreset failed (device not ready)
ata1: applying SB600 PMP SRST workaround and retrying
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD1600AAJS-00L7A0, 01.03E01, max UDMA/133
ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600AAJS-0 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with journal data mode.
udev: starting version 146
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
powernow-k8: Found 1 AMD Phenom(tm) II X2 550 Processor processors (2 cpu cores) (version 2.20.00)
powernow-k8:    0 : pstate 0 (3100 MHz)
powernow-k8:    1 : pstate 1 (2400 MHz)
powernow-k8:    2 : pstate 2 (1900 MHz)
powernow-k8:    3 : pstate 3 (800 MHz)
fuse init (API version 7.13)
loop: module loaded
it87: Found IT8718F chip at 0x228, revision 5
it87: in3 is VCC (+5V)
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
Uniform Multi-Platform E-IDE driver
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
atiixp 0000:00:14.1: IDE controller (0x1002:0x439c rev 0x00)
ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfa00-0xfa07
atiixp 0000:00:14.1: simplex device: DMA disabled
ide1: DMA disabled
Probing IDE interface ide0...
skge 0000:03:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
skge 1.13 addr 0xfdcf8000 irq 20 chip Yukon-Lite rev 9
skge eth0: addr 00:1e:58:aa:de:39
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: no MSI. Back to INTx.
eth1: RTL8168c/8111c at 0xf878c000, 00:24:1d:2f:db:71, XID 1c4000c0 IRQ 18
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ohci1394 0000:03:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[fdcff000-fdcff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
Probing IDE interface ide1...
ide1: no devices on the port
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
hda_codec: ALC889A: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input0
HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
HDA Intel 0000:01:05.1: setting latency timer to 64
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
EXT3 FS on sda1, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0045404e0000241d]
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 5245180k swap on /dev/sda6.  Priority:-1 extents:1 across:5245180k 
Bridge firewalling registered
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
skge eth0: enabling interface
r8169: eth1: link down
iSCSI Enterprise Target Software - version 1.4.19
iscsi_trgt: Registered io type fileio
iscsi_trgt: Registered io type blockio
iscsi_trgt: Registered io type nullio
skge eth0: Link is up at 100 Mbps, full duplex, flow control both
br0: port 1(eth0) entering learning state
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
br0: port 1(eth0) entering forwarding state
Slow work thread pool: Starting up
Slow work thread pool: Ready
BUG: Dentry f1d0d770{i=2,n=/} still in use (1) [unmount of cifs cifs]
------------[ cut here ]------------
kernel BUG at fs/dcache.c:670!
invalid opcode: 0000 [#1] SMP 
last sysfs file: /sys/module/iscsi_trgt/refcnt
Modules linked in: nls_utf8 cifs cpufreq_conservative nfsd exportfs nfs lockd nfs_acl auth_rpcgss sunrpc crc32c bridge stp llc snd_hda_codec_atihdmi ata_generic pata_atiixp snd_hda_codec_realtek ohci_hcd ide_pci_generic snd_hda_intel ohci1394 8250_pnp 8250 serial_core snd_hda_codec snd_pcm snd_timer ieee1394 r8169 mii snd soundcore snd_page_alloc skge atiixp tun ehci_hcd ide_core usbcore kvm_amd kvm it87 hwmon_vid hwmon loop fuse powernow_k8 processor ext3 jbd mbcache sd_mod ahci libata [last unloaded: iscsi_trgt]

Pid: 12214, comm: umount.cifs Not tainted (2.6.32-ARCH #1) GA-MA78GM-UD2H
EIP: 0060:[<c10aa0db>] EFLAGS: 00010282 CPU: 1
EIP is at shrink_dcache_for_umount_subtree+0x1db/0x1f0
EAX: 0000004c EBX: f1d0d770 ECX: f6f0bf10 EDX: c1290030
ESI: f1d0d7cc EDI: 00000001 EBP: f8f4118a ESP: f6f0bf0c
 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process umount.cifs (pid: 12214, ti=f6f0a000 task=f6e2dd00 task.ti=f6f0a000)
Stack:
 c1290030 f1d0d770 00000002 f1d0d7cc 00000001 f8f4118a f74a9564 f74a9400
<0> f8f3e0e0 c10d41e0 f764ec18 c10aa115 f74a9400 c109b3d6 c10af5cf c110c419
<0> 00000011 f8f4c540 c109b4d9 f74a9400 c109bbc7 00000000 f6e2dd00 f74a9400
Call Trace:
 [<c10d41e0>] ? vfs_quota_off+0x0/0x10
 [<c10aa115>] ? shrink_dcache_for_umount+0x25/0x40
 [<c109b3d6>] ? generic_shutdown_super+0x16/0xd0
 [<c10af5cf>] ? mntput_no_expire+0x6f/0xc0
 [<c110c419>] ? _atomic_dec_and_lock+0x59/0x80
 [<c109b4d9>] ? kill_anon_super+0x9/0x40
 [<c109bbc7>] ? deactivate_super+0x57/0x90
 [<c10af8e7>] ? sys_umount+0x57/0x360
 [<c1002e08>] ? sysenter_do_call+0x12/0x26
Code: 20 81 c2 64 01 00 00 89 6c 24 14 89 7c 24 10 89 54 24 18 89 74 24 0c 89 5c 24 04 89 44 24 08 c7 04 24 30 00 29 c1 e8 b3 8c 17 00 <0f> 0b eb fe 0f 0b eb fe 8d b6 00 00 00 00 8d bc 27 00 00 00 00 
EIP: [<c10aa0db>] shrink_dcache_for_umount_subtree+0x1db/0x1f0 SS:ESP 0068:f6f0bf0c
---[ end trace 4d3699434a04d4e5 ]---
