[Samba] samba pdc winbind
duportail
guy at duportail.be
Thu Feb 12 08:19:39 MST 2015
Op woensdag 11 februari 2015 22:11:03 schreef Rowland Penny:
> On 11/02/15 20:43, duportail wrote:
> > Op woensdag 11 februari 2015 20:18:57 schreef Rowland Penny:
> >> On 11/02/15 20:13, duportail wrote:
> >>> Op woensdag 11 februari 2015 19:56:54 schreef Rowland Penny:
> >>>> On 11/02/15 19:25, duportail wrote:
> >>>>> Op woensdag 11 februari 2015 19:09:48 schreef Rowland Penny:
> >>>>>> On 11/02/15 18:29, duportail wrote:
> >>>>>>> ( could not post complete reply, message too large?)
> >>>>>>>
> >>>>>>>
> >>>>>>> I think that's why I have a lot of black screens on the clients.
> >>>>>>> Here debian pdc smb.conf:
> >>>>>>> root at fai:~# cat /etc/samba/smb.conf
> >>>>>>> # This is the main Samba configuration file. You should read the
> >>>>>>> # smb.conf(5) manual page in order to understand the options listed
> >>>>>>> # here. Samba has a huge number of configurable options (perhaps too
> >>>>>>> # many!) most of which are not shown in this example
> >>>>>>> #
> >>>>>>> # For a step to step guide on installing, configuring and using samba,
> >>>>>>> # read the Samba-HOWTO-Collection. This may be obtained from:
> >>>>>>> # http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
> >>>>>>> #
> >>>>>>> # Many working examples of smb.conf files can be found in the
> >>>>>>> # Samba-Guide which is generated daily and can be downloaded from:
> >>>>>>> # http://www.samba.org/samba/docs/Samba-Guide.pdf
> >>>>>>> #
> >>>>>>> # Any line which starts with a ; (semi-colon) or a # (hash)
> >>>>>>> # is a comment and is ignored. In this example we will use a #
> >>>>>>> # for commentry and a ; for parts of the config file that you
> >>>>>>> # may wish to enable
> >>>>>>> #
> >>>>>>> # NOTE: Whenever you modify this file you should run the command "testparm"
> >>>>>>> # to check that you have not made any basic syntactic errors.
> >>>>>>> #
> >>>>>>> #======================= Global Settings =====================================
> >>>>>>> [global]
> >>>>>>>
> >>>>>>> # workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
> >>>>>>> workgroup = fai
> >>>>>>>
> >>>>>>> # server string is the equivalent of the NT Description field
> >>>>>>> server string = Samba Server
> >>>>>>>
> >>>>>>> # Security mode. Defines in which mode Samba will operate. Possible
> >>>>>>> # values are share, user, server, domain and ads. Most people will want
> >>>>>>> # user level security. See the Samba-HOWTO-Collection for details.
> >>>>>>> security = user
> >>>>>>>
> >>>>>>> # This option is important for security. It allows you to restrict
> >>>>>>> # connections to machines which are on your local network. The
> >>>>>>> # following example restricts access to two C class networks and
> >>>>>>> # the "loopback" interface. For more examples of the syntax see
> >>>>>>> # the smb.conf man page
> >>>>>>> ; hosts allow = 192.168.1. 192.168.2. 127.
> >>>>>>>
> >>>>>>> # If you want to automatically load your printer list rather
> >>>>>>> # than setting them up individually then you'll need this
> >>>>>>> load printers = yes
> >>>>>>>
> >>>>>>> # you may wish to override the location of the printcap file
> >>>>>>> ; printcap name = /etc/printcap
> >>>>>>>
> >>>>>>> # on SystemV system setting printcap name to lpstat should allow
> >>>>>>> # you to automatically obtain a printer list from the SystemV spool
> >>>>>>> # system
> >>>>>>> ; printcap name = lpstat
> >>>>>>>
> >>>>>>> # It should not be necessary to specify the print system type unless
> >>>>>>> # it is non-standard. Currently supported print systems include:
> >>>>>>> # bsd, cups, sysv, plp, lprng, aix, hpux, qnx
> >>>>>>> ; printing = cups
> >>>>>>>
> >>>>>>> # Uncomment this if you want a guest account, you must add this to /etc/passwd
> >>>>>>> # otherwise the user "nobody" is used
> >>>>>>> ; guest account = pcguest
> >>>>>>>
> >>>>>>> # this tells Samba to use a separate log file for each machine
> >>>>>>> # that connects
> >>>>>>> log file = /var/log/samba/log.%m
> >>>>>>>
> >>>>>>> # Put a capping on the size of the log files (in Kb).
> >>>>>>> max log size = 50
> >>>>>>>
> >>>>>>> # Use password server option only with security = server
> >>>>>>> # The argument list may include:
> >>>>>>> # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
> >>>>>>> # or to auto-locate the domain controller/s
> >>>>>>> # password server = *
> >>>>>>> ; password server = <NT-Server-Name>
> >>>>>>>
> >>>>>>> # Use the realm option only with security = ads
> >>>>>>> # Specifies the Active Directory realm the host is part of
> >>>>>>> ; realm = MY_REALM
> >>>>>>>
> >>>>>>> # Backend to store user information in. New installations should
> >>>>>>> # use either tdbsam or ldapsam. smbpasswd is available for backwards
> >>>>>>> # compatibility. tdbsam requires no further configuration.
> >>>>>>> passdb backend = tdbsam
> >>>>>>>
> >>>>>>> # Using the following line enables you to customise your configuration
> >>>>>>> # on a per machine basis. The %m gets replaced with the netbios name
> >>>>>>> # of the machine that is connecting.
> >>>>>>> # Note: Consider carefully the location in the configuration file of
> >>>>>>> # this line. The included file is read at that point.
> >>>>>>> ; include = /usr/local/samba/lib/smb.conf.%m
> >>>>>>>
> >>>>>>> # Configure Samba to use multiple interfaces
> >>>>>>> # If you have multiple network interfaces then you must list them
> >>>>>>> # here. See the man page for details.
> >>>>>>> # interfaces = 192.168.12.2/24 192.168.5.2/24
> >>>>>>>
> >>>>>>> # Browser Control Options:
> >>>>>>> # set local master to no if you don't want Samba to become a master
> >>>>>>> # browser on your network. Otherwise the normal election rules apply
> >>>>>>> ; local master = no
> >>>>>>>
> >>>>>>> # OS Level determines the precedence of this server in master browser
> >>>>>>> # elections. The default value should be reasonable
> >>>>>>> ; os level = 33
> >>>>>>>
> >>>>>>> # Domain Master specifies Samba to be the Domain Master Browser. This
> >>>>>>> # allows Samba to collate browse lists between subnets. Don't use this
> >>>>>>> # if you already have a Windows NT domain controller doing this job
> >>>>>>> domain master = yes
> >>>>>>>
> >>>>>>> # Preferred Master causes Samba to force a local browser election on startup
> >>>>>>> # and gives it a slightly higher chance of winning the election
> >>>>>>> preferred master = yes
> >>>>>>>
> >>>>>>> # Enable this if you want Samba to be a domain logon server for
> >>>>>>> # Windows95 workstations.
> >>>>>>> domain logons = yes
> >>>>>>>
> >>>>>>> # if you enable domain logons then you may want a per-machine or
> >>>>>>> # per user logon script
> >>>>>>> # run a specific logon batch file per workstation (machine)
> >>>>>>> logon script = %m.bat
> >>>>>>> # run a specific logon batch file per username
> >>>>>>> logon script = %U.bat
> >>>>>>>
> >>>>>>> # Where to store roving profiles (only for Win95 and WinNT)
> >>>>>>> # %L substitutes for this servers netbios name, %U is username
> >>>>>>> # You must uncomment the [Profiles] share below
> >>>>>>> logon path = \\%L\Profiles\%U
> >>>>>>>
> >>>>>>> # Windows Internet Name Serving Support Section:
> >>>>>>> # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
> >>>>>>> ; wins support = yes
> >>>>>>>
> >>>>>>> # WINS Server - Tells the NMBD components of Samba to be a WINS Client
> >>>>>>> # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
> >>>>>>> ; wins server = 192.168.5.1
> >>>>>>>
> >>>>>>> # WINS Proxy - Tells Samba to answer name resolution queries on
> >>>>>>> # behalf of a non WINS capable client, for this to work there must be
> >>>>>>> # at least one WINS Server on the network. The default is NO.
> >>>>>>> wins proxy = yes
> >>>>>>>
> >>>>>>> # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
> >>>>>>> # via DNS nslookups. The default is NO.
> >>>>>>> dns proxy = no
> >>>>>>>
> >>>>>>> # These scripts are used on a domain controller or stand-alone
> >>>>>>> # machine to add or delete corresponding unix accounts
> >>>>>>> add user script = /usr/sbin/useradd %u
> >>>>>>> add group script = /usr/sbin/groupadd %g
> >>>>>>> add machine script = /usr/sbin/useradd -N -g machines -c Machine -d /var/lib/samba -s /bin/false %u
> >>>>>>> delete user script = /usr/sbin/userdel %u
> >>>>>>> delete user from group script = /usr/sbin/deluser %u %g
> >>>>>>> delete group script = /usr/sbin/groupdel %g
> >>>>>>>
> >>>>>>>
> >>>>>>> #============================ Share Definitions ==============================
> >>>>>>> [homes]
> >>>>>>> comment = Home Directories
> >>>>>>> browseable = yes
> >>>>>>> read only = no
> >>>>>>> guest ok = yes
> >>>>>>> create mask = 0700
> >>>>>>> directory mask = 0700
> >>>>>>> valid users = %S
> >>>>>>> invalid users = root
> >>>>>>> # Un-comment the following and create the netlogon directory for Domain Logons
> >>>>>>> [netlogon]
> >>>>>>> comment = Network Logon Service
> >>>>>>> path = /usr/local/samba/lib/netlogon
> >>>>>>> guest ok = yes
> >>>>>>> writable = no
> >>>>>>> #share modes = yes
> >>>>>>>
> >>>>>>>
> >>>>>>> # Un-comment the following to provide a specific roving profile share
> >>>>>>> # the default is to use the user's home directory
> >>>>>>> ;[Profiles]
> >>>>>>> ; path = /usr/local/samba/profiles
> >>>>>>> ; browseable = no
> >>>>>>> ; guest ok = yes
> >>>>>>>
> >>>>>>>
> >>>>>>> # NOTE: If you have a BSD-style print system there is no need to
> >>>>>>> # specifically define each individual printer
> >>>>>>> [printers]
> >>>>>>> comment = All Printers
> >>>>>>> path = /usr/spool/samba
> >>>>>>> browseable = no
> >>>>>>> # Set public = yes to allow user 'guest account' to print
> >>>>>>> guest ok = no
> >>>>>>> writable = no
> >>>>>>> printable = yes
> >>>>>>>
> >>>>>>> # This one is useful for people to share files
> >>>>>>> ;[tmp]
> >>>>>>> ; comment = Temporary file space
> >>>>>>> ; path = /tmp
> >>>>>>> ; read only = no
> >>>>>>> ; public = yes
> >>>>>>>
> >>>>>>> # A publicly accessible directory, but read only, except for people in
> >>>>>>> # the "staff" group
> >>>>>>> ;[public]
> >>>>>>> ; comment = Public Stuff
> >>>>>>> ; path = /home/samba
> >>>>>>> ; public = yes
> >>>>>>> ; writable = no
> >>>>>>> ; printable = no
> >>>>>>> ; write list = @staff
> >>>>>>>
> >>>>>>> # Other examples.
> >>>>>>> #
> >>>>>>> # A private printer, usable only by fred. Spool data will be placed in fred's
> >>>>>>> # home directory. Note that fred must have write access to the spool directory,
> >>>>>>> # wherever it is.
> >>>>>>> ;[fredsprn]
> >>>>>>> ; comment = Fred's Printer
> >>>>>>> ; valid users = fred
> >>>>>>> ; path = /homes/fred
> >>>>>>> ; printer = freds_printer
> >>>>>>> ; public = no
> >>>>>>> ; writable = no
> >>>>>>> ; printable = yes
> >>>>>>>
> >>>>>>> # A private directory, usable only by fred. Note that fred requires write
> >>>>>>> # access to the directory.
> >>>>>>> ;[fredsdir]
> >>>>>>> ; comment = Fred's Service
> >>>>>>> ; path = /usr/somewhere/private
> >>>>>>> ; valid users = fred
> >>>>>>> ; public = no
> >>>>>>> ; writable = yes
> >>>>>>> ; printable = no
> >>>>>>>
> >>>>>>> # a service which has a different directory for each machine that connects
> >>>>>>> # this allows you to tailor configurations to incoming machines. You could
> >>>>>>> # also use the %U option to tailor it by user name.
> >>>>>>> # The %m gets replaced with the machine name that is connecting.
> >>>>>>> ;[pchome]
> >>>>>>> ; comment = PC Directories
> >>>>>>> ; path = /usr/pc/%m
> >>>>>>> ; public = no
> >>>>>>> ; writable = yes
> >>>>>>>
> >>>>>>> # A publicly accessible directory, read/write to all users. Note that all files
> >>>>>>> # created in the directory by users will be owned by the default user, so
> >>>>>>> # any user with access can delete any other user's files. Obviously this
> >>>>>>> # directory must be writable by the default user. Another user could of course
> >>>>>>> # be specified, in which case all files would be owned by that user instead.
> >>>>>>> ;[public]
> >>>>>>> ; path = /usr/somewhere/else/public
> >>>>>>> ; public = yes
> >>>>>>> ; only guest = yes
> >>>>>>> ; writable = yes
> >>>>>>> ; printable = no
> >>>>>>>
> >>>>>>> # The following two entries demonstrate how to share a directory so that two
> >>>>>>> # users can place files there that will be owned by the specific users. In this
> >>>>>>> # setup, the directory should be writable by both users and should have the
> >>>>>>> # sticky bit set on it to prevent abuse. Obviously this could be extended to
> >>>>>>> # as many users as required.
> >>>>>>> ;[myshare]
> >>>>>>> ; comment = Mary's and Fred's stuff
> >>>>>>> ; path = /usr/somewhere/shared
> >>>>>>> ; valid users = mary fred
> >>>>>>> ; public = no
> >>>>>>> ; writable = yes
> >>>>>>> ; printable = no
> >>>>>>> ; create mask = 0765
> >>>>>>>
> >>>>>>>
> >>>>>> OK, after wading through the commented lines, I end up with:
> >>>>>>
> >>>>>> PDC smb.conf:
> >>>>>>
> >>>>>> [global]
> >>>>>> workgroup = fai
> >>>>>> server string = Samba Server
> >>>>>> security = user
> >>>>>> load printers = yes
> >>>>>> log file = /var/log/samba/log.%m
> >>>>>> max log size = 50
> >>>>>> passdb backend = tdbsam
> >>>>>> domain master = yes
> >>>>>> preferred master = yes
> >>>>>> domain logons = yes
> >>>>>> logon script = %m.bat
> >>>>>> logon script = %U.bat
> >>>>>> logon path = \\%L\Profiles\%U
> >>>>>> wins proxy = yes
> >>>>>> dns proxy = no
> >>>>>> add user script = /usr/sbin/useradd %u
> >>>>>> add group script = /usr/sbin/groupadd %g
> >>>>>> add machine script = /usr/sbin/useradd -N -g machines -c Machine -d
> >>>>>> /var/lib/samba -s /bin/false %u
> >>>>>> delete user script = /usr/sbin/userdel %u
> >>>>>> delete user from group script = /usr/sbin/deluser %u %g
> >>>>>> delete group script = /usr/sbin/groupdel %g
> >>>>>>
> >>>>>> [homes]
> >>>>>> comment = Home Directories
> >>>>>> browseable = yes
> >>>>>> read only = no
> >>>>>> guest ok = yes
> >>>>>> create mask = 0700
> >>>>>> directory mask = 0700
> >>>>>> valid users = %S
> >>>>>> invalid users = root
> >>>>>>
> >>>>>> [netlogon]
> >>>>>> comment = Network Logon Service
> >>>>>> path = /usr/local/samba/lib/netlogon
> >>>>>> guest ok = yes
> >>>>>> writable = no
> >>>>>>
> >>>>>> [printers]
> >>>>>> comment = All Printers
> >>>>>> path = /usr/spool/samba
> >>>>>> browseable = no
> >>>>>> guest ok = no
> >>>>>> writable = no
> >>>>>> printable = yes
> >>>>>>
> >>>>>>
> >>>>>> Client smb.conf
> >>>>>>
> >>>>>> [global]
> >>>>>> workgroup = fai
> >>>>>> server string = %h server (Samba, Ubuntu)
> >>>>>> wins server = 172.20.68.14
> >>>>>> winbind separator = /
> >>>>>> winbind use default domain = Yes
> >>>>>> dns proxy = no
> >>>>>> winbind uid = 10000-20000
> >>>>>> winbind gid = 10000-20000
> >>>>>> template shell = /bin/bash
> >>>>>> allow trusted domains = yes
> >>>>>> name resolve order = lmhosts host wins bcast
> >>>>>> name resolve order = wins lmhosts host bcast
> >>>>>> log file = /var/log/samba/log.%m
> >>>>>> max log size = 1000
> >>>>>> syslog = 0
> >>>>>> panic action = /usr/share/samba/panic-action %d
> >>>>>> security = domain
> >>>>>> password server = 172.20.68.14
> >>>>>> encrypt passwords = true
> >>>>>> passdb backend = tdbsam
> >>>>>> obey pam restrictions = yes
> >>>>>> unix password sync = yes
> >>>>>> passwd program = /usr/bin/passwd %u
> >>>>>> passwd chat = *Enter\snew\s*\spassword:* %n\n
> >>>>>> *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
> >>>>>> pam password change = yes
> >>>>>> map to guest = bad user
> >>>>>> add user script = /usr/sbin/adduser --quiet --disabled-password
> >>>>>> --gecos "" %u
> >>>>>> add machine script = /usr/sbin/useradd -g machines -c "%u machine
> >>>>>> account" -d /var/lib/samba -s /bin/false %u
> >>>>>> add group script = /usr/sbin/addgroup --force-badname %g
> >>>>>> socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
> >>>>>> template shell = /bin/bash
> >>>>>> template homedir = /home/%U
> >>>>>> usershare allow guests = yes
> >>>>>>
> >>>>>> #======================= Share Definitions =======================
> >>>>>>
> >>>>>> valid users = %S
> >>>>>>
> >>>>>> [printers]
> >>>>>> comment = All Printers
> >>>>>> browseable = no
> >>>>>> path = /var/spool/samba
> >>>>>> printable = yes
> >>>>>> guest ok = no
> >>>>>> read only = yes
> >>>>>> create mask = 0700
> >>>>>>
> >>>>>> [print$]
> >>>>>> comment = Printer Drivers
> >>>>>> path = /var/lib/samba/printers
> >>>>>> browseable = yes
> >>>>>> read only = yes
> >>>>>> guest ok = no
> >>>>>>
> >>>>>> There are a few lines that are duplicated in each smb.conf.
> >>>>>>
> >>>>>> I take it that you only use the PDC for authentication and don't let the
> >>>>>> users login.
> >>>>>>
> >>>>>> It has been sometime since I setup and used a linux client with a PDC,
> >>>>>> but I don't actually remember having all those passwd & script lines in
> >>>>>> the client smb.conf.
> >>>>>>
> >>>>>> Do the users exist as unix users on both machines ?
> >>>>>>
> >>>>>> Rowland
> >>>>>>
> >>>>> No, the users are created on the debian pdc. that is the long number (as their username).
> >>>>> Than the users can login on a joined ubuntu computer in the classroom. It does not matter which one.
> >>>>> The long number (as their username) comes from a smartcard).
> >>>>> I have this setup in many schools, and working ok. But on this setup, with the long numbers as usernames, i have problems.
> >>>>> As I was debugging, i tried to su the user on a client machine, and got another user instead:
> >>>>> root at blank005:~# su 59031614949
> >>>>> 98121524292 at blank005:/root$
> >>>>>
> >>>>> I never seen this .
> >>>>> Is it a problem with long usernames and winbind?
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>> Well, the portion of the logfile you posted is full of lines like this:
> >>>>
> >>>> Failed to find a Unix account for 92101633919
> >>>>
> >>>> OK, just what part of that line do you not understand ?? :-)
> >>>>
> >>>> You need a unix user for '92101633919'
> >>>>
> >>>> Rowland
> >>>>
> >>> Correct, but there was this user:
> >>>
> >>> on debian pdc:
> >>> root at fai:~# cat /var/log/auth.log | grep 92101633919
> >>> Feb 10 14:54:51 fai useradd[9507]: new group: name=92101633919, GID=1209
> >>> Feb 10 14:54:51 fai useradd[9507]: new user: name=92101633919, UID=1209, GID=1209, home=/home/92101633919, shell=/bin/sh
> >>> Feb 10 14:54:51 fai useradd[9507]: add '92101633919' to group 'audio'
> >>> Feb 10 14:54:51 fai useradd[9507]: add '92101633919' to group 'dip'
> >>> Feb 10 14:54:51 fai useradd[9507]: add '92101633919' to group 'video'
> >>> Feb 10 14:54:51 fai useradd[9507]: add '92101633919' to group 'plugdev'
> >>> Feb 10 14:54:51 fai useradd[9507]: add '92101633919' to group 'fuse'
> >>> Feb 10 14:54:51 fai useradd[9507]: add '92101633919' to group 'pulse'
> >>> Feb 10 14:54:51 fai useradd[9507]: add '92101633919' to group 'pulse-access'
> >>> Feb 10 14:54:51 fai useradd[9507]: add '92101633919' to shadow group 'audio'
> >>> Feb 10 14:54:51 fai useradd[9507]: add '92101633919' to shadow group 'dip'
> >>> Feb 10 14:54:51 fai useradd[9507]: add '92101633919' to shadow group 'video'
> >>> Feb 10 14:54:51 fai useradd[9507]: add '92101633919' to shadow group 'plugdev'
> >>> Feb 10 14:54:51 fai useradd[9507]: add '92101633919' to shadow group 'fuse'
> >>> Feb 10 14:54:51 fai useradd[9507]: add '92101633919' to shadow group 'pulse'
> >>> Feb 10 14:54:51 fai useradd[9507]: add '92101633919' to shadow group 'pulse-access'
> >>>
> >> OK, is '92101633919' in /etc/passwd on the pdc and does 'getent passwd
> >> 92101633919' return anything ?
> >>
> >> If they both are true, then you may have run into this bug:
> >> https://bugzilla.samba.org/show_bug.cgi?id=11044
> >>
> >> Rowland
> >>
> >>
> >>
> > Ok,
> > getent on another works ok,
> > but not on a user with numbers:
> > root at fai:~# getent passwd ubu
> > ubu:x:1000:1000:ubu,,,:/home/ubu:/bin/bash
> > root at fai:~# getent passwd 71101411853
> > root at fai:~#
> >
> >
> > part of /etc/passwd
> >
> > ubu:x:1000:1000:ubu,,,:/home/ubu:/bin/bash
> > bind:x:111:120::/var/cache/bind:/bin/false
> > fai$:x:1001:1003:Machine:/var/lib/samba:/bin/false
> > test:x:1002:1004::/home/test:/bin/sh
> > sshuser:x:1003:1005::/home/sshuser:/bin/sh
> > ubuntu8053$:x:1008:1003:Machine:/var/lib/samba:/bin/false
> > blank1$:x:1009:1003:Machine:/var/lib/samba:/bin/false
> > blank3$:x:1011:1003:Machine:/var/lib/samba:/bin/false
> > blank4$:x:1012:1003:Machine:/var/lib/samba:/bin/false
> > blank5$:x:1013:1003:Machine:/var/lib/samba:/bin/false
> > blank6$:x:1014:1003:Machine:/var/lib/samba:/bin/false
> > linux:x:1026:1026::/home/linux:/bin/sh
> > blank2$:x:1072:1003:blank2:/var/lib/nobody:/bin/false
> > blank004$:x:1092:1003:Machine:/var/lib/samba:/bin/false
> > blank001$:x:1093:1003:Machine:/var/lib/samba:/bin/false
> > blank005$:x:1094:1003:Machine:/var/lib/samba:/bin/false
> > blank002$:x:1095:1003:Machine:/var/lib/samba:/bin/false
> > blank003$:x:1096:1003:Machine:/var/lib/samba:/bin/false
> > blank006$:x:1097:1003:Machine:/var/lib/samba:/bin/false
> > 71101411853:x:1103:1103:60,,,:/home/71101411853:/bin/sh
> > ayke:x:1104:1104:60,,,:/home/ayke:/bin/sh
> > blank0001$:x:1146:1003:Machine:/var/lib/samba:/bin/false
> >
> > could it be the 60 in the line:
> > 71101411853:x:1103:1103:60,,,:/home/71101411853:/bin/sh
> >
> > I use this 60 to know on the client machines how long the can be logged in ( so that will be 60 minutes)
> > I add this with :
> > chfn -f 60 $username71101411853
> >
> >
>
> OK, it looks like your users have id's in the 1xxx range, yet you have
> this in smb.conf: winbind uid = 10000-20000, could this be your problem ?
>
> Rowland
>
>
No, this does not help.
What I also see if a numeric username such as 71101411853 log in on a client pc, and starts for example firefox, than top shows that firefox is run by another (non numeric) local user.
net cache flush did also not help
More information about the samba
mailing list