[Samba] Samba + CUPS
Sébastien Le Ray
sebastien-samba at orniz.org
Mon Oct 20 09:33:40 MDT 2014
apt-get -t wheezy-backports install winbind
Regards
Le 20/10/2014 17:26, José Eduardo S. C. Xavier a écrit :
> It now fails with the following error: http://pastebin.com/CE5386Mh
> When I do sudo apt-get install winbind there is a reference to a 3.6.6
> version of it:
>
> pi at lynx ~ $ sudo apt-get install winbind
> Reading package lists... Done
> Building dependency tree
> Reading state information... Done
> Some packages could not be installed. This may mean that you have
> requested an impossible situation or if you are using the unstable
> distribution that some required packages have not yet been created
> or been moved out of Incoming.
> The following information may help to resolve the situation:
>
> The following packages have unmet dependencies:
> winbind : Depends: libwbclient0 (= 2:3.6.6-6+deb7u4) but
> 2:4.1.11+dfsg-1~bpo70+1 is to be installed
> Depends: samba-common (= 2:3.6.6-6+deb7u4) but
> 2:4.1.11+dfsg-1~bpo70+1 is to be installed
> Recommends: libpam-winbind but it is not going to be installed
> Recommends: libnss-winbind but it is not going to be installed
> E: Unable to correct problems, you have held broken packages.
> pi at lynx ~ $
>
>
>
> 2014-10-20 16:18 GMT+01:00 José Eduardo S. C. Xavier <josescxavier at gmail.com
>> :
>> 2 days of compile process
>> https://lists.samba.org/archive/samba-technical/2012-August/086330.html :s
>>
>> 2014-10-20 16:16 GMT+01:00 José Eduardo S. C. Xavier <
>> josescxavier at gmail.com>:
>>
>> I can try to compile from source if you guide me on this process.
>>> 2014-10-20 16:09 GMT+01:00 José Eduardo S. C. Xavier <
>>> josescxavier at gmail.com>:
>>>
>>> How can I know If I it is installing the current version? saw someone
>>>> with a similar problem because have installed a armv7 package instead of a
>>>> armv6.
>>>>
>>>> 2014-10-20 16:00 GMT+01:00 L.P.H. van Belle <belle at bazuin.nl>:
>>>>
>>>> ok, try the following.
>>>>> 1) make a backup of /etc/samba /var/lib/samba /var/cache/samba
>>>>>
>>>>> 2
>>>>> this removes and purges/clears all of samba
>>>>> apt-get remove --purge `dpkg -l | grep samba | cut -f3 -d" "`
>>>>>
>>>>> if needed apt-get install mlocate
>>>>> updatedb
>>>>> locate samba
>>>>> clear the rest of it.
>>>>>
>>>>> install backports samba again.
>>>>>
>>>>> Louis
>>>>>
>>>>>
>>>>> ------------------------------
>>>>> *Van:* José Eduardo S. C. Xavier [mailto:josescxavier at gmail.com]
>>>>> *Verzonden:* maandag 20 oktober 2014 16:57
>>>>> *Aan:* L.P.H. van Belle
>>>>>
>>>>> *CC:* samba at lists.samba.org
>>>>> *Onderwerp:* Re: [Samba] Samba + CUPS
>>>>>
>>>>> they look like for arm
>>>>>
>>>>> 2014-10-20 15:56 GMT+01:00 José Eduardo S. C. Xavier <
>>>>> josescxavier at gmail.com>:
>>>>>
>>>>>> pi at lynx ~ $ dpkg -l | grep samba
>>>>>> ii python-samba
>>>>>> 2:4.1.11+dfsg-1~bpo70+1 armhf Python bindings for
>>>>>> Samba
>>>>>> iF samba
>>>>>> 2:4.1.11+dfsg-1~bpo70+1 armhf SMB/CIFS file, print,
>>>>>> and login server for Unix
>>>>>> ii samba-common
>>>>>> 2:4.1.11+dfsg-1~bpo70+1 all common files used by
>>>>>> both the Samba server and client
>>>>>> ii samba-common-bin
>>>>>> 2:4.1.11+dfsg-1~bpo70+1 armhf Samba common files
>>>>>> used by both the server and the client
>>>>>> ii samba-dsdb-modules
>>>>>> 2:4.1.11+dfsg-1~bpo70+1 armhf Samba Directory
>>>>>> Services Database
>>>>>> ii samba-libs:armhf
>>>>>> 2:4.1.11+dfsg-1~bpo70+1 armhf Samba core libraries
>>>>>> ii samba-vfs-modules
>>>>>> 2:4.1.11+dfsg-1~bpo70+1 armhf Samba Virtual
>>>>>> FileSystem plugins
>>>>>> pi at lynx ~ $
>>>>>>
>>>>>>
>>>>>> 2014-10-20 15:55 GMT+01:00 José Eduardo S. C. Xavier <
>>>>>> josescxavier at gmail.com>:
>>>>>>
>>>>>> I think the problem is that I'm running it on a raspberry pi (ARM)
>>>>>>> and the source should be for x86/x64, no?
>>>>>>>
>>>>>>> 2014-10-20 15:54 GMT+01:00 L.P.H. van Belle <belle at bazuin.nl>:
>>>>>>>
>>>>>>> please post the output of :
>>>>>>>> dpkg -l | grep samba
>>>>>>>> to make sure there is no old samba4 things.
>>>>>>>>
>>>>>>>>
>>>>>>>>> -----Oorspronkelijk bericht-----
>>>>>>>>> Van: josescxavier at gmail.com
>>>>>>>>> [mailto:samba-bounces at lists.samba.org] Namens José Eduardo S. C.
>>>>>>>> Xavier
>>>>>>>>> Verzonden: maandag 20 oktober 2014 16:46
>>>>>>>>> Aan: Rowland Penny
>>>>>>>> >CC: samba at lists.samba.org
>>>>>>>>> Onderwerp: Re: [Samba] Samba + CUPS
>>>>>>>>>
>>>>>>>>> http://pastebin.com/Apr8HJPj it fails to run :s
>>>>>>>>>
>>>>>>>>> 2014-10-20 14:02 GMT+01:00 José Eduardo S. C. Xavier
>>>>>>>>> <josescxavier at gmail.com
>>>>>>>>>> :
>>>>>>>>>> lets try it :)
>>>>>>>>>>
>>>>>>>>>> 2014-10-20 13:37 GMT+01:00 Rowland Penny
>>>>>>>>> <rowlandpenny at googlemail.com>:
>>>>>>>>>>> On 20/10/14 13:27, José Eduardo S. C. Xavier wrote:
>>>>>>>>>>>
>>>>>>>>>>>> The samba from wheezy backports is the 3.6.6, right? it is
>>>>>>>>> what I had
>>>>>>>>>>>> installed with sudo apt-get install samba.
>>>>>>>>>>>>
>>>>>>>>>>>> 2014-10-20 13:24 GMT+01:00 L.P.H. van Belle <belle at bazuin.nl>:
>>>>>>>>>>>>
>>>>>>>>>>>> stop..
>>>>>>>>>>>>> Dont install samba4.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Of use sernet-samba
>>>>>>>>>>>>> or use samba from wheezy backports.
>>>>>>>>>>>>>
>>>>>>>>>>>>> samba4 is the most bad version.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> -----Oorspronkelijk bericht-----
>>>>>>>>>>>>>> Van: josescxavier at gmail.com
>>>>>>>>>>>>>> [mailto:samba-bounces at lists.samba.org] Namens José Eduardo
>>>>>>>> S. C.
>>>>>>>>>>>>>> Xavier
>>>>>>>>>>>>>> Verzonden: maandag 20 oktober 2014 14:22
>>>>>>>>>>>>>> Aan: Sven Schwedas
>>>>>>>>>>>>>> CC: samba at lists.samba.org
>>>>>>>>>>>>>> Onderwerp: Re: [Samba] Samba + CUPS
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I'm removing samba and install samba4 from apt-get to
>>>>>>>>> try if it works.
>>>>>>>>>>>>>> 2014-10-20 13:19 GMT+01:00 Sven Schwedas <
>>>>>>>> sven.schwedas at tao.at>:
>>>>>>>>>>>>>> On 2014-10-20 14:13, José Eduardo S. C. Xavier wrote:
>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>> I have configured a CUPS printer server with samba and it
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> worked with
>>>>>>>>>>>>>>> Windows 7 32/64bits but now with windows 8 it can't get
>>>>>>>>>>>>>>> the drivers.
>>>>>>>>>>>>>>> I found it https://bugzilla.samba.org/show_bug.cgi?id=9474
>>>>>>>>>>>>>>> but doesn't
>>>>>>>>>>>>>>> know
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> how to use the patch to solve the problem. I'm using a
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> raspberry pi.
>>>>>>>>>>>>>>> By updating to a more recent Samba version, as you were
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> instructed to on
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> the bugtracker.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Mit freundlichen Grüßen, / Best Regards,
>>>>>>>>>>>>>>> Sven Schwedas
>>>>>>>>>>>>>>> Systemadministrator
>>>>>>>>>>>>>>> TAO Beratungs- und Management GmbH | Lendplatz 45 | A -
>>>>>>>>> 8020 Graz
>>>>>>>>>>>>>>> Mail/XMPP: sven.schwedas at tao.at | +43 (0)680 301 7167
>>>>>>>> <%2B43%20%280%29680%20301%207167>
>>>>>>>>>>>>>>> http://software.tao.at
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> To unsubscribe from this list go to the following URL
>>>>>>>>> and read the
>>>>>>>>>>>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> To unsubscribe from this list go to the following URL
>>>>>>>>> and read the
>>>>>>>>>>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>> No the samba from backports is not 3.6.6, it is (at the
>>>>>>>>> moment) 4.1.11
>>>>>>>>>>> To install it, you would use:
>>>>>>>>>>>
>>>>>>>>>>> apt-get -t wheezy-backports install samba
>>>>>>>>>>>
>>>>>>>>>>> Rowland
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> To unsubscribe from this list go to the following URL and read
>>>>>>>> the
>>>>>>>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> To unsubscribe from this list go to the following URL and read the
>>>>>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>>>>
>>>>>>>>
More information about the samba
mailing list