[Samba] [Announce] Samba 4.1.0rc4 Available for Download

Karolin Seeger kseeger at samba.org
Fri Sep 27 05:01:22 MDT 2013


Release Announcements
=====================

This is the fourth release candidate of Samba 4.1.  This is *not*
intended for production environments and is designed for testing
purposes only.  Please report any defects via the Samba bug reporting
system at https://bugzilla.samba.org/.

Samba 4.1 will be the next version of the Samba suite and includes
all the technology found in both the Samba4 series and the stable 3.x
series. The primary additional features over Samba 3.6 are
support for the Active Directory logon protocols used by Windows 2000
and above.

If you are upgrading, or looking to develop, test or deploy Samba 4.1
releases candidates, you should backup all configuration and data.


NEW FEATURES
============

Client tools support SMB2/3
===========================

Samba 4.1.0 contains the first release of our client tools
and client library that work over the new protocols SMB2 or SMB3.
Note that SMB3 only works either to a Samba server version 4.0.0
or above, or to a Windows Server running Windows 2012 or Windows 8.

The default protocol for smbclient and smbcacls is still
SMB1 (the NT1 protocol dialect). An SMB2 or SMB3 connection
can be selected in one of two ways. The easiest way to test
the new protocol connection is to add the -mMAX_PROTOCOL
command line switch to either smbclient or smbcacls.

For example, to connect using SMB3 with smbclient a user
would type:

smbclient //server/share -Uuser%password -mSMB3

Another example of connecting using SMB2 using smbcacls
would be:

smbcacls //server/share -Uuser%password -mSMB2 filename

Note that when connecting using SMB2 or SMB3 protocols
the UNIX extensions are no longer available inside the
smbclient command set. This is due to UNIX extensions
not yet being defined for the SMB2 or SMB3 protocols.

The second way to select SMB2 or SMB3 connections is to
set the "client max protocol" parameter in the [global]
section of your smb.conf.

Setting this parameter will cause all client connections
from Samba and its client tools to offer the requested
max protocol to a server on every connection request.

For example, to cause all client tools (including winbindd,
rpcclient, and the libsmbclient library) to attempt use SMB3
by default add the line:

client max protocol = SMB3

to the [global] section of your smb.conf. This has not
been as widely tested as the -mPROTOCOL options, but
is intended to work correctly in the final release of
4.1.0.

Encrypted transport
===================

Although Samba servers have supported encrypted transport
connections using the UNIX extensions for many years,
selecting SMB3 transport allows encrypted transport
connections to Windows servers that support SMB3, as
well as Samba servers.

In order to enable this, add the "-e" option to the
smbclient command line.

For example, to connect to a Windows 2012 server over
SMB3 and select an encrypted transport you would use
the following command line:

smbclient //Win2012Server/share -Uuser%password -mSMB3 -e


Directory database replication (AD DC mode)
===========================================

Directory replication has been reworked in order to improve the
correctness and efficiency.
As a net effect of it, replication with other domain controllers with
a heavily modified schema is now possible (ie. Windows 2012 DCs or
other Windows DC with exchange installed) and replication didn't fail
anymore in such environments.


Server-Side Copy Support
========================

Samba 4.1.0 adds support for server-side copy operations via the SMB2
FSCTL_SRV_COPYCHUNK request. Clients making use of server-side copy
support, such as Windows Server 2012, should experience considerable
performance improvements for file copy operations, as file data need not
traverse the network.
This feature is enabled by default on the smbd file server.


Btrfs Filesystem Integration
============================

The Btrfs VFS module provided with Samba 4.1.0 further improves the
performance of server-side copy operations on shares backed by a Btrfs
filesystem. It does so by allowing multiple files to share the same
on-disk extents, avoiding the unnecessary duplication of source and
destination file data during a server-side copy operation.

This feature can be explicitly enabled on smbd shares backed by a Btrfs
filesystem with the smb.conf parameter:
vfs objects = btrfs


REMOVED COMPONENTS
==================

The Samba Web Administration Tool (SWAT) has been removed.


######################################################################
Changes
#######

smb.conf changes
----------------

   Parameter Name			Description	Default
   --------------			-----------	-------

   acl allow execute always		New		False
   password level			Removed
   set directory			Removed
   use ntdb				New		No


RUNNING Samba 4.1 as an AD DC
=============================

A short guide to setting up Samba as an AD DC can be found on the wiki:

  https://wiki.samba.org/index.php/Samba_AD_DC_HOWTO


COMMIT HIGHLIGHTS
=================

o   Jeremy Allison <jra at samba.org>
    * Add SMB2 and SMB3 support for client tools and client library.
    * Add support for SMB3 Encrypted transport.


o   David Disseldorp <ddiss at samba.org>
    * Add vfs_btrfs module.
    * Add support for server-side copy operations via the
      SMB2 FSCTL_SRV_COPYCHUNK request.


CHANGES SINCE 4.1.0rc3
======================

o   Michael Adam <obnox at samba.org>
    * BUG 10134: Add "acl allow execute always" parameter.


o   Jeremy Allison <jra at samba.org>
    * BUG 10139: Valid utf8 filenames cause "invalid conversion error"
      messages.
    * BUG 10145: Samba SMB2 client code reads the wrong short name length in a
      directory listing reply.
    * BUG 10149: cli_smb2_get_ea_list_path() failed to close file on exit.
    * BUG 10150: Not all OEM servers support the ALTNAME info level.


o   Andrew Bartlett <abartlet at samba.org>
    * BUG 8077: dsdb: Convert the full string from UTF16 to UTF8, including
      embedded NULLs.
    * BUG 9461: python-samba-tool fsmo: Do not give an error on a successful
      role transfer.
    * BUG 10157: Regression causes replication failure with Windows 2008R2 and
      deletes Deleted Objects.


o   Günther Deschner <gd at samba.org>
    * BUG 10147: Better document potential implications of a globally used
      "valid users".


o   Korobkin <korobkin+samba at gmail.com>
    * BUG 10118: Raise the level of a debug when unable to open a printer.


o   Volker Lendecke <vl at samba.org>
    * BUG 10008: dbwrap_ctdb: Treat empty records as non-existing.
    * BUG 10138: smbd: Always clean up share modes after hard crash.


o   Daniel Liberman <danielvl at gmail.com>
    * BUG 10162: Fix POSIX ACL mapping when setting DENY ACE's from Windows.


o   Stefan Metzmacher <metze at samba.org>
    * BUG 10144: libcli/smb: Use SMB1 MID=0 for the initial Negprot.
    * BUG 10146: libcli/smb: Only check the SMB2 session setup signature if
      required and valid.


o   Matthieu Patou <mat at matws.net>
    * BUG 10158: Netbios related samba process consumes 100% CPU.


o   Christof Schmitt <christof.schmitt at us.ibm.com>
    * BUG 10137: vfs_shadow_copy2: Display previous versions correctly over
      SMB2.


CHANGES SINCE 4.1.0rc2
======================

o   Michael Adam <obnox at samba.org>
    * BUG 10107: Fix Winbind crashes on DC with trusted AD domains.


o   Jeremy Allison <jra at samba.org>
    * BUG 5917: Fix working on site with Read Only Domain Controller.
    * BUG 9974: Add SMB2 and SMB3 support for smbclient.
    * BUG 10063: Fix memory leak in source3/lib/util.c:1493.
    * BUG 10121: Masks incorrectly applied to UNIX extension permission
      changes.


o   Christian Ambach <ambi at samba.org>
    * BUG 9911: Build Samba 4.0.x on AIX with IBM XL C/C++.


o   Andrew Bartlett <abartlet at samba.org>
    * BUG 9091: When replicating DNS for bind9_dlz we need to create the
      server-DNS account remotely.


o   Günther Deschner <gd at samba.org>
    * BUG 9615: Winbind unable to retrieve user information from AD.
    * BUG 9899: winbind_lookup_names() fails because of
      NT_STATUS_CANT_ACCESS_DOMAIN_INFO.
    * BUG 10107: Fix Winbind crashes on DC with trusted AD domains.


o   Volker Lendecke <vl at samba.org>
    * BUG 10086: smbd: Fix async echo handler forking.
    * BUG 10106: Honour output buffer length set by the client for SMB2 GetInfo
      requests.
    * BUG 10114: Handle Dropbox (write-only-directory) case correctly
      in pathname lookup.


o   Stefan Metzmacher <metze at samba.org>
    * BUG 10030: ::1 added to nameserver on join.


o   Rusty Russell <rusty at rustcorp.com.au>
    * BUG 10000: Add man pages for ntdb tools.


o   Karolin Seeger <kseeger at samba.org>
    * BUG 7364: Add man page for vfs_syncops.
    * BUG 7490: Add man page for vfs_linux_xfs_sgid.
    * BUG 10001: Add man page for samba-regedit tool.
    * BUG 10076: Fix variable list in vfs_crossrename man page.


o   Andreas Schneider <asn at samba.org>
    * BUG 10073: Fix segmentation fault in 'net ads join'.
    * BUG 10082: s3-winbind: Fix a segfault passing NULL to a fstring argument.


o   Richard Sharpe <realrichardsharpe at gmail.com>
    * BUG 10097: MacOSX 10.9 will not follow path-based DFS referrals handed
      out by Samba.


o   Ralph Wuerthner <ralph.wuerthner at de.ibm.com>
    * BUG 10106: Honour output buffer length set by the client for SMB2 GetInfo
      requests.


CHANGES SINCE 4.1.0rc1
======================

o   Jeremy Allison <jra at samba.org>
    * BUG 9992: Windows error 0x800700FE when copying files with xattr names
      containing ":".
    * BUG 10010: Missing integer wrap protection in EA list reading can cause
      server to loop with DOS (CVE-2013-4124).
    * BUG 10064: Linux kernel oplock breaks can miss signals.


o   Andrew Bartlett <abartlet at samba.org>
    * BUG 9029: Fix replication with --domain-crictical-only to fill in
      backlinks.
    * BUG 9820: Fix crash of winbind after "ls -l
      /usr/local/samba/var/locks/sysvol".
    * BUG 10056: dsdb improvements.


o   Björn Baumbach <bb at sernet.de>
    * BUG 10003: Fix segfault while reading incomplete session info.


o   Gregor Beck <gbeck at sernet.de>
    * BUG 9678: Windows 8 Roaming profiles fail.


o   Günther Deschner <gd at samba.org>
    * BUG 10043: Allow to change the default location for Kerberos credential
      caches.


o   Volker Lendecke <vl at samba.org>
    * BUG 10013: Fix a 100% loop at shutdown time (smbd).


o   Stefan Metzmacher <metze at samba.org>
    * BUG 9820: Fix crash of winbind after "ls -l
      /usr/local/samba/var/locks/sysvol".
    * BUG 10015: Fix/improve debug options.
    * BUG 10042: Fix crashes in socket_get_local_addr().
    * BUG 10056: dsdb improvements.


o   Andreas Schneider <asn at samba.org>
    * BUG 9994: Do not delete an existing valid credential cache (s3-winbind).
    * BUG 10040: Rename regedit to samba-regedit.
    * BUG 10041: Remove obsolete swat manpage and references.
    * BUG 10048: nsswitch: Add OPT_KRB5CCNAME to avoid an error message.


o   Alexander Werth <alexander.werth at de.ibm.com>
    * BUG 10045: Remove a redundant inlined substitution of ACLs.


o   Ralph Wuerthner <ralphw at de.ibm.com>
    * BUG 10064: Linux kernel oplock breaks can miss signals.


#######################################
Reporting bugs & Development Discussion
#######################################

Please discuss this release on the samba-technical mailing list or by
joining the #samba-technical IRC channel on irc.freenode.net.

If you do report problems then please try to send high quality
feedback. If you don't provide vital information to help us track down
the problem then you will probably be ignored.  All bug reports should
be filed under the Samba 4.1 product in the project's Bugzilla
database (https://bugzilla.samba.org/).


======================================================================
== Our Code, Our Bugs, Our Responsibility.
== The Samba Team
======================================================================


================
Download Details
================

The uncompressed tarballs and patch files have been signed
using GnuPG (ID 6568B7EA).  The source code can be downloaded
from:

        http://download.samba.org/samba/ftp/rc/

The release notes are available online at:

	http://www.samba.org/samba/ftp/rc/WHATSNEW-4.1.0rc4.txt

Binary packages will be made available on a volunteer basis from

        http://download.samba.org/samba/ftp/Binary_Packages/

Our Code, Our Bugs, Our Responsibility.
(https://bugzilla.samba.org/)

                        --Enjoy
                        The Samba Team


More information about the samba mailing list