[Samba] Samba 4 provisioning error on Ubuntu 12.04

Wed Jun 20 15:17:09 MDT 2012

Hi Andrew, Rowland.

Thank you for taking the time to answer my questions and offer suggestions.
I had to take a break over the last few days as I needed to put out fires.
Now I am back to the Samba4 server effort.

I am really wanting to get this to work.

I have tried the various suggestions.
I tried to uninstall Samba3 but encountered an error that prevented this.
I then tried to follow the instructions suggested by  L.P.H. van Belle.
I then tried Rowlands suggestion of adding 2 lines to smb.conf.  Still not working.
I tried the suggestions related to installing Samba4 again.  Still not working.

Grasping at straws I decided to update all packages - 39 needed updates.  37 worked. 2 failed to update.
I then ran the provision command and am still getting the error.
    > sudo /usr/local/samba/sbin/provision --realm=server.com --domain=server --adminpass=<mypassword>  --server-role=dc     Looking up IPv4 addresses     Looking up IPv6 addresses     No IPv6 address will be assigned     get_nt_acl_no_snum: fset_nt_acl returned zero.     ProvisioningError: Your filesystem or build does not support posix ACLs, s3fs is unworkable in this mode
The problem seems to be related to the posix ACLs.  How do I get these to work?  

I have not tried the steps from 
>>> http://spore.sodgeit.de/sporeblog-samba4EN.html
because this is based on the Samba HowTo that I followed in the first place.

Any other suggestions about how to get this working?

I am willing to completely reinstall if this will make this easier to start with a clean system.

Thanks.

Todd.

________________________________
 From: Rowland Penny <rpenny at f2s.com>
To: Andrew Bartlett <abartlet at samba.org> 
Cc: samba at lists.samba.org 
Sent: Saturday, June 16, 2012 6:15:40 AM
Subject: Re: [Samba] Samba 4 provisioning error on Ubuntu 12.04

On 16/06/12 03:49, Andrew Bartlett wrote:
> On Fri, 2012-06-15 at 13:36 +0100, Rowland Penny wrote:
>> On 15/06/12 12:58, L.P.H. van Belle wrote:
>>> ah from sources...
>>>
>>> then .
>>> http://spore.sodgeit.de/sporeblog-samba4EN.html
>>> very easy also. installer script, tested this also, and works also ok ( for me )
>>>
>>> just change in the installer alfa20 to beta1  ( in samba4.sh )
>>> samba-4.0.0beta1.tar.gz
>>>
>>>
>>> Greetz,
>>>
>>> Louis
>>>
>>>> -----Oorspronkelijk bericht-----
>>>> Van: rpenny at f2s.com [mailto:samba-bounces at lists.samba.org]
>>>> Namens Rowland Penny
>>>> Verzonden: 2012-06-15 10:41
>>>> Aan: samba at lists.samba.org
>>>> Onderwerp: Re: [Samba] Samba 4 provisioning error on Ubuntu 12.04
>>>>
>>>> On 15/06/12 07:20, L.P.H. van Belle wrote:
>>>>> Hai,
>>>>>
>>>>> I did this install yesterday, bug is already reported in ubuntu.
>>>>>
>>>>> This is simple to resolve.
>>>>>
>>>>> first apt-get build-dep samba4
>>>>> install these dependecies.
>>>>>
>>>>> apt-get install samba4
>>>>> chmod +x /usr/share/samba/setoption.pl
>>>>> edit /var/lib/dpkg/status and search for package: samba4
>>>>> replace half-configured with installed
>>>>>
>>>>> remove /etc/samba/smb.conf
>>>>>
>>>>> /usr/share/samba/setup/provision --realm=DOMAIN.LOCAL
>>>> --domain=DOMAIN --adminpass='YourPassword' --server-role=dc
>>>>> and read, for the extra things.
>>>>>
>>>> http://www.matrix44.net/cms/notes/gnulinux/samba-4-ad-domain-wi
>>>> th-ubuntu-12-04
>>>>> nice howto to install samba4 on ubuntu.
>>>>>
>>>>> Did my install in 5 min. AD nicely up and running.
>>>>>
>>>>>
>>>>> Louis
>>>>>
>>>>>
>>>>>
>>>>>> -----Oorspronkelijk bericht-----
>>>>>> Van: abartlet at samba.org [mailto:samba-bounces at lists.samba.org]
>>>>>> Namens Andrew Bartlett
>>>>>> Verzonden: 2012-06-15 03:44
>>>>>> Aan: zoolook
>>>>>> CC: samba at lists.samba.org
>>>>>> Onderwerp: Re: [Samba] Samba 4 provisioning error on Ubuntu 12.04
>>>>>>
>>>>>> On Thu, 2012-06-14 at 16:58 -0300, zoolook wrote:
>>>>>>> Hello,
>>>>>>>
>>>>>>> 2012/6/14 todd kman<tkman26 at yahoo.com>:
>>>>>>>> I looked up ACL and how to get them supported and tried
>>>>>> the following:
>>>>>>>> sudo apt-get install attr
>>>>>>> Almost. Install libattr1-dev
>>>>>> We need that, but also libacl1-dev
>>>>>>
>>>>>> Andrew Bartlett
>>>>>> -- 
>>>>>> Andrew Bartlett
>>>>>> http://samba.org/~abartlet/
>>>>>> Authentication Developer, Samba Team          http://samba.org
>>>>>>
>>>>>> -- 
>>>>>> To unsubscribe from this list go to the following URL and read the
>>>>>> instructions:  https://lists.samba.org/mailman/options/samba
>>>>>>
>>>>>>
>>>> The OP is trying to compile the latest Samba4 from git (beta2), not
>>>> install an old version (alpha18) via apt-get. Having said
>>>> that, this may
>>>> be the quickest way for him to install it, if he just wants to try it.
>>>> There is no problem compiling Samba4 on Ubuntu 12.04, it just
>>>> takes longer.
>>>>
>>>> Rowland
>>>>
>>>>
>>>> -- 
>>>> This message has been scanned for viruses and
>>>> dangerous content by MailScanner, and is
>>>> believed to be clean.
>>>>
>>>> -- 
>>>> To unsubscribe from this list go to the following URL and read the
>>>> instructions:  https://lists.samba.org/mailman/options/samba
>>>>
>>>>
>> I am not sure if it will work with beta1 upwards, the template smb.conf
>> is missing the following two lines:
>>           dcerpc endpoint servers = epmapper, wkssvc, rpcecho, samr,
>> netlogon, lsarpc, spoolss, drsuapi, dssetup, unixinfo, browser,
>> eventlog6, backupkey, dnsserver
>>           server services = rpc, nbt, wrepl, ldap, cldap, kdc, drepl,
>> winbind, ntp_signd, kcc, dnsupdate, s3fs
> These lines are only needed to enable the new 's3fs' default file
> server.  This will soon (very soon) be the default, no smb.conf
> required.
>
> Andrew Bartlett
>
Ok, I can understand that if it is the default, it will not require 
setting, but no smb.conf required?

Rowland

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba