[Samba] Question regarding printers - problem with current rleease

[Karl Denninger]

Hi folks;

Not sure what's going on here....

Running 3.0.14a here, with a fairly default config.  

Base OS is FreeBSD 5.4-STABLE.

FreeBSD 5.4-STABLE #11: Fri Apr  8 09:48:24 CDT 2005     karl at FS.denninger.net:/usr/obj/usr/src/sys/KSD-SMP 

Here's the output from "testparm"


Load smb config files from /usr/local/etc/smb.conf
Processing section "[homes]"
Processing section "[printers]"
Processing section "[faxserver]"
Processing section "[pics]"
Loaded services file OK.
Server role: ROLE_DOMAIN_PDC
Press enter to see a dump of your service definitions
# Global parameters
[global]
	workgroup = DENNINGER
	server string = Home Office FileServer
	interfaces = 192.168.1.0/24
	max log size = 50
	deadtime = 15
	domain logons = Yes
	preferred master = Yes
	domain master = Yes
	dns proxy = No
	wins support = Yes
	remote announce = 192.168.1.255
	invalid users = root
	hosts allow = 192.168.1.0/255.255.255.0, 127.
	printing = bsd
	print command = lpr -r -P'%p' %s
	lpq command = lpq -P'%p'
	lprm command = lprm -P'%p' %j

[homes]
	comment = Home Directories
	read only = No
	browseable = No

[printers]
	comment = All Printers
	path = /disk/spool/samba
	printer admin = @wheel
	printable = Yes
	browseable = No

[faxserver]
	comment = Fax Server Files
	path = /disk/system
	valid users = system, karl
	read only = No
	create mask = 0765

[pics]
	comment = Picture files
	path = /pics
	valid users = system, karl
	read only = No
	create mask = 0765


Ok, now the problem...

Everything works correctly EXCEPT that I cannot see the contents of a print
queue.  I can browse printers (as I specified that was ok), I can connect to
them, <AND I CAN PRINT>.

However, the status comes up as "access denied, unable to connect" when I
look at it from an XP workstation that is signed on and connected to the
printer.  I am completely unable to view the print queue.  Obviously I can't
remove a print job either, since I can't see them.

Local viewing of the queue from Unix works (e.g. "lpq -PLaser" does the
expected thing, and produces the expected output)

Any ideas what I've done wrong?  Read the FAQ and install instructions, I
can't see anything obviously screwed up - and everything else - including
printing itself - works ....

Thanks!

--
-- 
Karl Denninger (karl at denninger.net) Internet Consultant & Kids Rights Activist
http://www.denninger.net	My home on the net - links to everything I do!
http://scubaforum.org		Your UNCENSORED place to talk about DIVING!
http://homecuda.com		Emerald Coast: Buy / sell homes, cars, boats!
http://genesis3.blogspot.com	Musings Of A Sentient Mind