[Samba] 2nd printer won't print

[Gregory W. Eckrich]

Good morning,

I would appreciate some help.  SAMBA is new turf.  I am working out of a 
John Blair Book  SAMBA: Integrating UNIX and Windows  1998

PROBLEM:  unable to print to the 2nd of two printers on a samba host.
ENVIRONMENT:
-4 systems in a home network; connected to an HP hub (10 meg)
-3 systems run Red Hat linux 9.0  (system names: snoopy, white, olblue)
-4th system runs Windows 2000 Professional (system name:  bigred)
-SAMBA server Snoopy has two directly attached printers, an HP 4L (old 
laser) on LPT1 and an HP OfficeJet T45 on LPT2
      Snoopy:  384 MEG RAM; celeron 400 Mhz
      SAMBA:  ver 2.2.7a
-On red: (Win2K) if a print job is sent to the HP_4L, it prints cleanly; 
if a print job is sent to the T45, it does not print
      Red:  COMPAQ Deskpro 64 MEG RAM; Pentium 200 Mhz
-On red: if one clicks start, run and types " \\snoopy", all shares on 
snoopy are seen, including the two printers
       [Win2K troubleshooting says that this demonstrates a "basic" 
connection]
-On red:  T45, upon being opened, reports in the title window:   "T45 on 
snoopy, Access denied unable to connect"
       HP_4L  initializes and then is available to print and does print
CONDITIONS on Snoopy:
-Both printers print correctly; various softwares see both printers

DIAGNOSTICS:
[root at snoopy greg]# smbclient -L snoopy -U '' -N
added interface ip=10.10.10.1 bcast=10.10.10.255 nmask=255.255.255.0
Domain=[CIRRUS] OS=[Unix] Server=[Samba 2.2.7a]
 
        Sharename      Type      Comment
        ---------      ----      -------
        etc            Disk      snoopy_etc
        C              Disk      snoopy_C
        win2k          Disk      snoopy_D
        ls120          Disk      snoopy_A
        printca        Disk      access printers
        IPC$           IPC       IPC Service (samba server)
        ADMIN$         Disk      IPC Service (samba server)
        HP_4L          Printer
        T45            Printer
 
        Server               Comment
        ---------            -------
        RED
        SNOOPY               samba server
 
        Workgroup            Master
        ---------            -------
        CIRRUS               SNOOPY
====================================
[root at snoopy /]# testparm /etc/samba/smb.conf
Load smb config files from /etc/samba/smb.conf
Processing section "[homes]"
Processing section "[printers]"
Processing section "[etc]"
Processing section "[C]"
Processing section "[win2k]"
Processing section "[ls120]"
Processing section "[printca]"
Loaded services file OK.
====================================
[root at snoopy /]# smbclient '\\snoopy\tmp'
added interface ip=10.10.10.1 bcast=10.10.10.255 nmask=255.255.255.0
Password:
Anonymous login successful
Domain=[CIRRUS] OS=[Unix] Server=[Samba 2.2.7a]
tree connect failed: NT_STATUS_BAD_NETWORK_NAME   <-------What's he 
telling me?
=====================================