[Samba] Can not connect to SWAT

[lovswr1]

Hello, Until yesterday (7 nov 03) I had a mostly working 2.27 samba
running on my redhat 9 box that I configured via SWAT. Now I can not get
back into SWAT & I also (in a useless attempt to make it work) upgraded
to samba 3.0 I get the following when trying to start SWAT: 
 
 
 An error occured while loading http://matrix1:901/: 
 
 
 Could not connect to host matrix1 (port 901) 
 
 
 
 here is my /etc/hosts file: 
 
 
 # Do not remove the following line, or various programs 
 # that require network functionality will fail. 
 127.0.0.1 localhost localhost.localdomain matrix1 
 192.168.2.147 philip 
 192.168.2.145 robert 
 192.168.1.148 pc2 
 192.168.1.149 freebsd 
 0.0.0.0 ads.osdn.com 
 0.0.0.0 claria.com 
 0.0.0.0 www.gator.com 
 
 
 Also /etc/services does have the correct port 901 set up &
/etc/xinetd/d/swat 
 
 description: swat is the Samba Web Administration Tool, which 
 # allows an administrator to configure Samba using a web 
 # browser interface, with the URL http://localhost:901 
 service swat. 
 { 
 disable = no 
 socket_type = stream 
 wait = no 
 protocol = tcp 
 only_from = matrix1 
 user = root 
 log_on_failure += USERID 
 server = /usr/sbin/swat 
 port = 901 
 } 
 & /etc/pam.d/samba 
 
 #%PAM-1.0 
 auth required pam_nologin.so 
 auth required pam_stack.so service=system-auth 
 account required pam_stack.so service=system-auth 
 session required pam_stack.so service=system-auth 
 password required pam_stack.so service=system-auth 
 # added by me in a panic attempt to get swat working again on 7 nov 03 
 samba auth required /lib/security/pam_pwdb.so nullok shadow 
 samba account required /lib/security/pam_pwdb.so 
 
 
 I dont't know if this is related but,my trouble started yesterday after
I actually got vnc-server working. I just left it at default so it
started on matrix1:1 I went to work (yes I puched a hole through
turtlefirewall just for this) & connected from my laptop at work via vnc
to the redhat box. I did not do anything & then jsut logged off. when I
got home I had to reboot the redhat box becuase konq would not work.
Kept complaing aobut something like the DHOCP server or other could not
be contactacted/(connected?). Well SWAT has not worked ever since. Now
the samba 2.7 still worked with a manual start, but this morning I did a
rpm -U| to 3.0 & now that too is not working  Any help ir direction
pointing would be greatly appreciated.