[Samba] windows file compatibility aka A Cry For Help
Chris McKeever
cgmckeever at prupref.com
Fri May 9 22:00:58 GMT 2003
I think I have narrowed it down to needing the archive and hidden bit
set..any ideas how to mimic this through a samba share...
thanks!!!
> -----Original Message-----
> From: Chris McKeever [mailto:tech-mail at prupref.com]
> Sent: Friday, May 09, 2003 4:17 PM
> To: 'Scott Shackelford'; samba at lists.samba.org
> Subject: RE: [Samba] windows file compatibility aka A Cry For Help
>
>
> gave it a shot...no go .. will keep toying with it!
>
> Thanks for the suggestion
>
> > -----Original Message-----
> > From: Scott Shackelford [mailto:scott at customtransport.com]
> > Sent: Friday, May 09, 2003 4:06 PM
> > To: samba at lists.samba.org
> > Subject: RE: [Samba] windows file compatibility aka A Cry For Help
> >
> >
> > I've seen some older programs not handle Network shares over
> > 2GB. I would
> > try to limit the max disk size reported to 2GB.
> >
> > In your smb.conf in the [global] section add
> >
> > max disk size = 2000
> >
> > and see if that fixes it. I usually see this on some
> > installers as they
> > think that if it's over 2GB or space that it thinks it's 0
> > space free. (Runs
> > out of bits.) Hope this helps.
> >
> > -Scott Shackelford
> >
> >
> >
> > > -----Original Message-----
> > > From: samba-bounces+scott=customtransport.com at lists.samba.org
> > > [mailto:samba-bounces+scott=customtransport.com at lists.samba.org]On
> > > Behalf Of Chris McKeever
> > > Sent: Friday, May 09, 2003 4:38 PM
> > > Cc: 'samba at lists.samba.org'
> > > Subject: [Samba] windows file compatibility aka A Cry For Help
> > >
> > >
> > > Everything is going amazing in the windows->samba
> > conversion until I ran
> > > into a roadblock..I really dont know what may be going on so I
> > > will outline
> > > it as best as I can.
> > >
> > > We have a program called realty toolkit which saves its
> > configuration and
> > > security settings onto the network. Well, after putting the
> > > files onto the
> > > linux box, it no loger wants to work, the security check fails.
> > >
> > > calling the vendor they asked 'is there any compression'
> > because they have
> > > seen this behavior with compressed drives, and thier explanation
> > > is 'toolkit
> > > looks for a specific file geometry and compression throws
> > that off' -- so
> > > my interpretation is that the file has to be written
> > correctly when read
> > >
> > > I can only guess that samba stores it a bit different, and
> > therefore the
> > > geometry is off...
> > >
> > > Does this make any sense? or is this way off and it is a
> > different problem
> > > that can be fixed???
> > >
> > > Other than that the implementation is running great!
> > > --
> > > To unsubscribe from this list go to the following URL and read the
> > > instructions: http://lists.samba.org/mailman/listinfo/samba
> > >
> >
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions: http://lists.samba.org/mailman/listinfo/samba
> >
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
>
More information about the samba
mailing list