[Samba] downloaded win98 print drivers fail in Samba 3.0

grant basham grant at rsmas.miami.edu
Thu Dec 11 20:03:37 GMT 2003


A PrintPro CUPS (v4.4.1) running Samba 3.0.0 on Fedora/Redhat Linux does
point&click driver download for WinXP just fine, but fails to do
point&click setup for Win98. When I do the point&click install, Only the
ADOBEPS4.DRV file is transferred.  If I manually copy the driver files
from \\server\print$\WIN40[\0] into the Win98 System area, it all works
fine. If I then delete the queue on Win98, only the ADOBEPS4.DRV file is
removed; the files copied in manually stay in the SYSTEM dir.  If I then
reinstall the queue via point&click, it all works.  If I then delete the
queue and remove the manually-installed files and reinstall, I am back at
the beginning with only ADOBEPS4.DRV and a non-working queue. Samba log
for setup is appended at bottom.

As suggested by Jerry, I updated so 3.0.1.rc2.  The
lib/util_str.c:safe_strcpy_fn(577) ERROR: NULL error message went away,
but the setup still did not work.  Moved the files in drivers/WIN40 to 
drivers/WIN40/0.  Still the same problem.  Further suggestions greatly 
appreciated.
--Grant


On Thu, 11 Dec 2003, Gerald (Jerry) Carter wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> grant basham wrote:
> 
> | Errors shown below in the gim98 samba log on
> | the samba server as
> |   lib/util_str.c:safe_strcpy_fn(577) ERROR: NULL
> |      dest in safe_strcpy
> 
> This is fixed in 3.0.1rc2.
> 
> |  /etc/samba/drivers/WIN40:
> |  total 768
> |  4 0/              16 DEFPRTR2.PPD*    60 PSMON.DLL*
> |  568 ADFONTS.MFM*   120 ICONLIB.DLL*
> 
> There shouldn't bee any files left in WIN40.  Perhaps a bad driver install.
> 
> |  /etc/samba/drivers/WIN40/0:
> |  total 1584
> |  1272 ADOBEPS4.DRV*   196 ADOBEPS4.HLP*    60 mpocol.PPD*
> |    56 rcfhp.PPD*
> 
> 
> 
> 
> - --
> ciao, jerry
> ~ ----------------------------------------------------------------------
> ~ Hewlett-Packard            ------------------------- http://www.hp.com
> ~ SAMBA Team                 ---------------------- http://www.samba.org
> ~ GnuPG Key                  ---- http://www.plainjoe.org/gpg_public.asc
> ~ "If we're adding to the noise, turn off this song" --Switchfoot (2003)
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.2.1 (GNU/Linux)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
> 
> iD8DBQE/2KrzIR7qMdg1EfYRAoCOAJ9VsGvkkfHkfoXEc4EZbZnulL5dWgCeLMCm
> NQKhKYy/fHyZCQRfij7ZNSo=
> =8xhv
> -----END PGP SIGNATURE-----
> 
==========current smaba setup log============================
[2003/12/11 14:39:13, 2] smbd/sesssetup.c:setup_new_vc_session(544)
  setup_new_vc_session: New VC == 0, if NT4.x compatible we would close 
all old resour
ces.
[2003/12/11 14:39:13, 2] auth/auth.c:check_ntlm_password(312)
  check_ntlm_password:  Authentication for user [TEST1210] -> [TEST1210] 
FAILED with e
rror NT_STATUS_NO_SUCH_USER
[2003/12/11 14:39:13, 2] lib/access.c:check_access(324)
  Allowed connection from  (129.171.97.21)
[2003/12/11 14:39:16, 2] smbd/server.c:exit_server(558)
  Closing connections
[2003/12/11 14:39:18, 2] smbd/sesssetup.c:setup_new_vc_session(544)
  setup_new_vc_session: New VC == 0, if NT4.x compatible we would close 
all old resour
ces.
[2003/12/11 14:39:18, 2] auth/auth.c:check_ntlm_password(312)
  check_ntlm_password:  Authentication for user [TEST1210] -> [TEST1210] 
FAILED with e
rror NT_STATUS_NO_SUCH_USER
[2003/12/11 14:39:18, 2] lib/access.c:check_access(324)
  Allowed connection from  (129.171.97.21)
[2003/12/11 14:39:21, 2] smbd/server.c:exit_server(558)
  Closing connections
[2003/12/11 14:39:24, 2] smbd/sesssetup.c:setup_new_vc_session(544)
  setup_new_vc_session: New VC == 0, if NT4.x compatible we would close 
all old resour
ces.
[2003/12/11 14:39:24, 2] auth/auth.c:check_ntlm_password(312)
  check_ntlm_password:  Authentication for user [TEST1210] -> [TEST1210] 
FAILED with e
rror NT_STATUS_NO_SUCH_USER
[2003/12/11 14:39:24, 2] lib/access.c:check_access(324)
  Allowed connection from  (129.171.97.21)
[2003/12/11 14:39:24, 1] smbd/service.c:make_connection_snum(705)
  gim98 (129.171.97.21) connect to service print$ initially as user samba 
(uid=1710, g
id=1710) (pid 23567)
[2003/12/11 14:39:24, 2] smbd/open.c:open_file(240)
  TEST1210 opened file WIN40/0/ADOBEPS4.DRV read=Yes write=No (numopen=1)
[2003/12/11 14:39:24, 2] smbd/close.c:close_normal_file(228)
  samba closed file WIN40/0/ADOBEPS4.DRV (numopen=0) 
[2003/12/11 14:39:24, 2] smbd/open.c:open_file(240)
  TEST1210 opened file WIN40/0/ADOBEPS4.DRV read=Yes write=No (numopen=1)
[2003/12/11 14:39:24, 2] smbd/close.c:close_normal_file(228)
  samba closed file WIN40/0/ADOBEPS4.DRV (numopen=0) 
[2003/12/11 14:39:24, 2] smbd/open.c:open_file(240)
  TEST1210 opened file WIN40/0/ADOBEPS4.DRV read=Yes write=No (numopen=1)
[2003/12/11 14:39:27, 2] lib/access.c:check_access(324)
  Allowed connection from  (129.171.97.21)
[2003/12/11 14:39:40, 2] lib/access.c:check_access(324)
  Allowed connection from  (129.171.97.21)
[2003/12/11 14:39:48, 2] lib/access.c:check_access(324)
  Allowed connection from  (129.171.97.21)
[2003/12/11 14:40:22, 2] lib/access.c:check_access(324)
  Allowed connection from  (129.171.97.21)
[2003/12/11 14:40:25, 2] smbd/close.c:close_normal_file(228)
  samba closed file WIN40/0/ADOBEPS4.DRV (numopen=0) 
[2003/12/11 14:40:25, 2] smbd/open.c:open_file(240)
  TEST1210 opened file WIN40/0/ADOBEPS4.DRV read=Yes write=No (numopen=1)
[2003/12/11 14:40:25, 2] smbd/close.c:close_normal_file(228)
  samba closed file WIN40/0/ADOBEPS4.DRV (numopen=0) 
[2003/12/11 14:40:25, 2] smbd/open.c:open_file(240)
  TEST1210 opened file WIN40/0/ADOBEPS4.DRV read=Yes write=No (numopen=1)
[2003/12/11 14:40:25, 2] lib/access.c:check_access(324)
  Allowed connection from  (129.171.97.21)
[2003/12/11 14:40:39, 2] lib/access.c:check_access(324)
  Allowed connection from  (129.171.97.21)

Grant Basham		305-361-4026		grant at rsmas.miami.edu





More information about the samba mailing list