[Samba] Samba HPUX 11.0

[Andrew Bartlett]

Servicio Administracion HP wrote:
> 
> Hello,
>         I need configure samba, my system is HP N4000 with HPUX 11.0
>         No problem for the installation of samba 2.2.3a
>         I have problem with configuration process (I think so), use testparm
> and is OK, daemons are up and running.

>                         tvsaha:/etc # smbclient -U% -L localhost
>                         added interface ip=133.1.13.30 bcast=133.1.13.31
> nmask=255.255.255.240
>                         added interface ip=133.1.12.25 bcast=133.1.12.31
> nmask=255.255.255.240
>                         added interface ip=16.1.1.1 bcast=16.1.1.255
> nmask=255.255.255.0
>                         Domain=[SIMPLE] OS=[Unix] Server=[Samba 2.2.3a]
>                         tree connect failed: SUCCESS - 0

This usually means somthing very bad happend.  Look in the server logs,
and see if you have a PANIC.  Try Samba 2.2.6pre2.

Andrew Bartlett

-- 
Andrew Bartlett                                 abartlet at pcug.org.au
Manager, Authentication Subsystems, Samba Team  abartlet at samba.org
Student Network Administrator, Hawker College   abartlet at hawkerc.net
http://samba.org     http://build.samba.org     http://hawkerc.net