Easy question

[Bunny Pfau]

Okay, I just updated our Samba configuration from
1.9.something to 2.2.1a.  THe users in question are 
running Win98.

This is probably a simple question, but I just don't have
the experience to know.

Our problem is that one user used to dial in through
our company's dial-in setup and run PPP, and then they
were assigned an IP address on a different subnet (.68).  In
the past, through Network Neighborhood, she could do 
a "search" for her PC, which is on OUR subnet (.16) and find it
and access the shared C: drive just  fine.  No changes
have been made to her PC, just our Samba server here.

How do I "advertise" or make accessible our .16 subnet PCs to
the .68 subnet?  Under Samba 1.9 obviously I didn't have to worry
about this, but Samba 2 is more secure..

Below is the smb.conf file.  I changed our IP numbers to 999.999
for privacy reasons..

# Samba config file created using SWAT
# from bob (999.999.16.39)
# Date: 2001/09/05 15:50:48

# Global parameters
[global]
	workgroup = SAMBA2
	netbios name = BOBSERVER
	server string = Samba2.2.1_bob
	username map = /opt/local/samba/lib/users.map
	log level = 4
	log file = /opt/local/samba/logs/log.%m
	os level = 64
	preferred master = True
	domain master = True
#	wins server = 999.999.16.5
	admin users = root
	printer admin = root
        hosts allow = 999.999.16.0/255.255.255.0 999.999.104.0/255.255.255.0 
999.999.68.0/255.255.255.0 999.999.65.0/255.255.255.0

[homes]
	comment = Home Directories
	read only = No
	browseable = No

[printers]
	comment = All Printers
	path = /tmp
	create mask = 0700
	printable = Yes
	browseable = No

[phasord]
	comment = phasor:/local/d
	path = /phasor/d
	valid users = joe bunny
	read only = No

[phasord1]
	comment = phasor:/local/d1
	path = /phasor/d1
	valid users = joe bunny
	read only = No