[linux-cifs-client] Can mount from one box, but not another

[Laker Netman]

Output from WORKING box:

 fs/cifs/cifsfs.c: Devname: //itcdrw/c$ flags: 64
 fs/cifs/connect.c: CIFS VFS: in cifs_mount as Xid: 595 with uid: 0
 fs/cifs/connect.c: Username: Administrator
 fs/cifs/connect.c: UNC: \\itcdrw\c$ ip: 192.168.12.209
 fs/cifs/connect.c: Socket created
 fs/cifs/connect.c: sndbuf 16384 rcvbuf 87380 rcvtimeo 0x7fffffff
 fs/cifs/connect.c: Demultiplex PID: 25100
 fs/cifs/connect.c: Existing smb sess not found
 fs/cifs/transport.c: For smb_command 114
 fs/cifs/transport.c: Sending smb of length 47
 fs/cifs/connect.c: rfc1002 length 0x7f)
 fs/cifs/connect.c: Security Mode: 0x3 Capabilities: 0xe3fd Time Zone: 360
 fs/cifs/connect.c: In sesssetup
 fs/cifs/transport.c: For smb_command 115
 fs/cifs/transport.c: Sending smb of length 262
 fs/cifs/connect.c: rfc1002 length 0x97)
 fs/cifs/connect.c: UID = 2048
 fs/cifs/connect.c: CIFS Session Established successfully
 fs/cifs/connect.c: file mode: 0x7f7  dir mode: 0x1ff
 fs/cifs/transport.c: For smb_command 117
 fs/cifs/transport.c: Sending smb of length 74
 fs/cifs/connect.c: rfc1002 length 0x42)
 fs/cifs/connect.c: Tcon flags: 0x1
 fs/cifs/connect.c: CIFS Tcon rc = 0
 fs/cifs/cifssmb.c: In QFSDeviceInfo
 fs/cifs/transport.c: For smb_command 50
 fs/cifs/transport.c: Sending smb of length 68
 fs/cifs/connect.c: rfc1002 length 0x44)
 fs/cifs/cifssmb.c: In QFSAttributeInfo
 fs/cifs/transport.c: For smb_command 50
 fs/cifs/transport.c: Sending smb of length 68
 fs/cifs/connect.c: rfc1002 length 0x50)
 fs/cifs/connect.c: CIFS VFS: leaving cifs_mount (xid = 595) rc = 0
 fs/cifs/inode.c: CIFS VFS: in cifs_read_inode as Xid: 596 with uid: 0
 fs/cifs/inode.c: Getting info on
 fs/cifs/transport.c: For smb_command 50
 fs/cifs/transport.c: Sending smb of length 74
 fs/cifs/connect.c: rfc1002 length 0x8a)
 fs/cifs/inode.c: Old time 0
 fs/cifs/inode.c: New time 774714125
 fs/cifs/inode.c: Directory inode
 fs/cifs/inode.c: CIFS VFS: in cifs_revalidate as Xid: 597 with uid: 68
 fs/cifs/inode.c: Revalidate:  inode 0xcc17d99c count 1 dentry: 0xc30f7490 d_time 774706528 jiffies 774714126
 fs/cifs/inode.c: CIFS VFS: leaving cifs_revalidate (xid = 597) rc = 0

Output from NON-WORKING box:

 fs/cifs/cifsfs.c: Devname: //itcdrw/c$ flags: 64
 fs/cifs/connect.c: CIFS VFS: in cifs_mount as Xid: 69 with uid: 0
 fs/cifs/connect.c: Username: Administrator
 fs/cifs/connect.c: UNC: \\itcdrw\c$ ip: 192.168.12.209
 fs/cifs/connect.c: Socket created
 fs/cifs/connect.c: sndbuf 16384 rcvbuf 87380 rcvtimeo 0x7fffffff
 fs/cifs/connect.c: Demultiplex PID: 3613
 fs/cifs/connect.c: Existing smb sess not found
 fs/cifs/cifssmb.c: secFlags 0x7
 fs/cifs/transport.c: For smb_command 114
 fs/cifs/transport.c: Sending smb of length 67
 fs/cifs/connect.c: rfc1002 length 0x7f)
 fs/cifs/cifssmb.c: Dialect: 1
 fs/cifs/cifssmb.c: negprot rc 0
 fs/cifs/connect.c: Security Mode: 0x3 Capabilities: 0xe3fd Time Zone: 360
 fs/cifs/sess.c: sess setup type 1
 fs/cifs/transport.c: For smb_command 115
 fs/cifs/transport.c: Sending smb:  total_len 288
 fs/cifs/connect.c: rfc1002 length 0x27)
 fs/cifs/netmisc.c:  !!Mapping smb error code 5 to POSIX err -13 !!
 fs/cifs/misc.c: Null buffer passed to cifs_small_buf_release
 fs/cifs/sess.c: ssetup rc from sendrecv2 is -13
 fs/cifs/sess.c: ssetup freeing small buf d1358200
 CIFS VFS: Send error in SessSetup = -13
 fs/cifs/connect.c: No session or bad tcon
 fs/cifs/connect.c: CIFS VFS: leaving cifs_mount (xid = 69) rc = -13
 CIFS VFS: cifs_mount failed w/return code = -13

Also, I have tried this with "user=X,password=Y" to insure no typoes in the password :)

----- Original Message ----
From: Shirish S Pargaonkar <shirishp at us.ibm.com>
To: Laker Netman <laker_netman at yahoo.com>
Cc: linux-cifs-client at lists.samba.org
Sent: Wednesday, November 8, 2006 9:56:12 AM
Subject: Re: [linux-cifs-client] Can mount from one box, but not another


linux-cifs-client-bounces+shirishp=us.ibm.com at lists.samba.org wrote on 11/08/2006 09:03:10 AM:



> Hi all.

> 

> The short version is I have two FC5 boxes connecting to a Windows 

> 2000 workstation's administrative shares on C$ and D$.  "Box 1" was 

> installed with FC5 from scratch (and updates nightly with Yum).  It 

> connects without issue to the W2K workstation in question, as 

> Administrator.  The second FC5 box was upgraded from FC4.  

> Previously at FC4 this box also connected without issue to the same 

> W2K box, again as Administrator.  After the upgrade to FC5 all is 

> get in "Box 2"s kernel log is:

>  CIFS VFS: Send error in SessSetup = -13

>  CIFS VFS: cifs_mount failed w/return code = -13

> 

> Googling has not turned up any valuable info on this error.

> 

> Suggestions as to what to reinstall/reconfigure or what to post for 

> additional clues are appreciated.

> 

> TIA,

> Laker



Can you issue these commands on the FC Linux box  echo 1 > /proc/fs/cifs/cifsFYI; dmesg -c

and then repeat the error case and send the dmesg output?

You can also generate an ethereal trace on either windows box or FC Linux box and send that file.

I get the same error when I send incorrect password.  -13 is error code EACCESS (permission denied).



Regards,



Shirish







 
____________________________________________________________________________________
Cheap talk?
Check out Yahoo! Messenger's low PC-to-Phone call rates.
http://voice.yahoo.com
-------------- next part --------------
HTML attachment scrubbed and removed